...le +5 volt supply No crystal or clock required Five network status LED outputs
BLOCK DIAGRAM
leas P
Tx+ 10 Tx- 11
e See
SQEN/JABD...receiving a frame from the optical input. Active low LED driver, open collector. Event is extended w...
...serial data input/output serial clock input Input for power-saving mode (see section "Power-saving mode"). Also used as a test output during...receiving a message is the `receiver'. The device that controls the message is the `master' and the ...
Description
256 x 8-bit static low-voltage RAM with I2C-bus interface
clock/calendar with Power Fail Detector
Product specification Supersedes data of May 1989 File under Integrated Circuits, IC12 1997 Mar 28
...receiving a message is the `receiver'. The device that controls the message is the `master' and the ...
...rupt output (active LOW) serial clock line serial data line supply voltage not connected not connected not connected not connected DESCRIPTI...receiving is the `receiver'. The device that controls the message is the `master' and the devices wh...
...l I/O 17 address input 0 serial clock line input serial data line input/output supply voltage Fig.2 Pin configuration.
P04 8 P05 9 P06 10 P...receiving the message is the `receiver'. The device that controls the message is the `master' and th...
Description
Remote 16-bit I/O expander for I2C-bus From old datasheet system
...C-bus data input/output I2C-bus clock input oscillator input/output external/internal switch for oscillator input analog ground voltage refe...receiving a message is the `receiver'. The device that controls the message is the `master' and the ...
...ighteen fixed baud rates, a 16X clock derived from a programmable counter/timer, or an external 1X or 16X clock. The baud rate generator and...receiving device is full. Also provided on the SCN2681 are a multipurpose 7-bit input port and a mul...
...upported. * Frequency of master clock signal is 33.8688 MHz. * Pin compatible with YMF704C-S (100 pin SQPF) * Voltage of power supply can be...receiving System Exclusive Message on the MIDI data, except that Suspend/Resume function is disabled...
Description
From old datasheet system YMF721 OPL4-ML2 FM Wavetable Synthesizer LSI