... B PWM Output to drive external bridge MOSFETs Power GND (for Output Drivers) Internal Supply Rail (Decouple with 1F Cap) Input Supply Pin (...controller IC
A functional block diagram of the ZXCD1010 is shown in Figure 2. The on chip series r...
Description
HIGH FIDELITY CLASS D AUDIO AMPLIFIER SOLUTION 2 CHANNEL, AUDIO AMPLIFIER, PDSO16 IC AMP AUDIO CLASS D MONO 16QSOP
... 1.8V power for the North/South bridge core voltage and/or cache memory circuits. The HIP6020A includes an Intel-compatible, TTL 5-input dig...controller's output is userselectable, through a TTL-compatible signal applied at the SELECT pin, fo...
Description
Advanced Dual PWM and Dual Linear Power controller
... 1.8V power for the North/South bridge core voltage and/or cache memory circuits. The HIP6020 includes an Intel-compatible, TTL 5-input digi...controller's output is userselectable, through a TTL-compatible signal applied at the SELECT pin, fo...
Description
From old datasheet system Advanced Dual PWM and Dual Linear Power controller
... 1.8V power for the North/South bridge core and/or cache memory. These levels are user-adjustable by means of an external resistor divider a...controller's over-current function monitors the output current by using the voltage drop across the ...
... 1.8V power for the North/South bridge core voltage and/or cache memory circuits. The HIP6021 includes an Intel-compatible, TTL 5-input digi...controller's output (VOUT2) is user-selectable, through a TTL-compatible signal applied at the SELEC...
Description
From old datasheet system Advanced PWM and Triple Linear Power controller
... 1.8V power for the North/South bridge core voltage and/or cache memory circuits. Both the switching regulator and linear voltage references...controller's adjustable overcurrent function monitors the output current by using the voltage drop a...
Description
PWM controller and Triple Linear Power controller, Adjustable Outputs, 0.8V Reference, ?% Reg, 300kHz Fsw PWM and Triple Linear Power controller
...gate in a synchronous-rectifier bridge to 12V, while the upper gate can be independently driven over a range from 5V to 12V. The HIP6603 dri...controller.
GND (Pin 4)
Bias and reference ground. All signals are referenced to this node.
L...
Description
Synchronous-Rectified Buck MOSFET Drivers From old datasheet system
...68EN302 is intended for low-end bridge and router applications. It has the three SCCs from the MC68302, plus an additional Ethernet interface giving it a total of four serial interfaces. Since the MC68EN302 has both the three SCCs as well a...
Description
Integrated Multiprotocol Processor with Ethernet 4 CHANNEL(S), 10M bps, LOCAL AREA NETWORK controller, PQFP144