|
|
|
Maxim
|
Part No. |
DS26502DK
|
OCR Text |
...ight-angle 5-pin L_CONN, Bantam jack, right-angle 100-mil, 2 position jumper 14-pin header, remove 'missing pin' Inductor, 22.0mH 2-pin SMT ...TYPE Read only -- Read only Read only Read only Read only Read only Read only Read only -- Control C... |
Description |
T1/E1/J1/64KCC Bits Element Design Kit
|
File Size |
1,357.28K /
30 Page |
View
it Online |
Download Datasheet |
|
|
|
MAXIM - Dallas Semiconductor
|
Part No. |
DS5000TK 5000TK
|
OCR Text |
... then be inserted into the RJ11 jack on the RS-232 fixture. Finally, the 40pin Target Cable should be connected between the edge connector o...type:
kit> verify test.hex <CR>
If the verify was successful, the message No Verification errors... |
Description |
From old datasheet system Microcontroller Evaluation Kit
|
File Size |
47.20K /
5 Page |
View
it Online |
Download Datasheet |
|
|
|
Intel
|
Part No. |
SA-1100 27817401
|
OCR Text |
...d, audio accessories (telephone jack, microphone, and speaker), PCMCIA connector, serial I/O interfaces (USB port, IrDA infrared support, SD...type interface.
* Two universal asynchronous receiver-transmitter (UART) ports support computer-t... |
Description |
StrongARM Microprocessor Evalutation Platform From old datasheet system
|
File Size |
28.27K /
6 Page |
View
it Online |
Download Datasheet |
|
|
|
Philips
|
Part No. |
TDA8542AT TDA8542A TDA8542AT/N1
|
OCR Text |
...common GND pin of the headphone jack not to ground, but to a voltage level of 12VCC (see Fig.14). In this case the BTL/SE pin must be either...type application boards with 1 oz copper traces with solder coating. The measurements have been carr... |
Description |
TDA8542AT; 2 x 1.5 W BTL audio amplifier
|
File Size |
150.74K /
20 Page |
View
it Online |
Download Datasheet |
|
|
|
Philips
|
Part No. |
TDA8542TS TDA8542
|
OCR Text |
...common GND pin of the headphone jack LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL VCC VI IORM Tst...type application boards with 1 oz copper traces with solder coating. The SSOP package has improved t... |
Description |
2 X 0.7 W BTL audio amplifier
|
File Size |
149.37K /
20 Page |
View
it Online |
Download Datasheet |
|
|
|
Maxim
|
Part No. |
MAX9850EVKIT
|
OCR Text |
...nput signals. A 3.5mm headphone jack allows for easy connection of headphones to the circuit board. The Maxim command module interface board...TYPE 0C to +70C 28 TQFN Not included TEMP RANGE CMOD232
MAX9850EVCMOD2 0C to +70C 28 TQFN
Note... |
Description |
Evaluation System/Evaluation Kit for the MAX9850
|
File Size |
434.60K /
22 Page |
View
it Online |
Download Datasheet |
|
|
|
MAXIM - Dallas Semiconductor MAXIM[Maxim Integrated Products]
|
Part No. |
MAX2102EVKIT MAX2102_1 MAX2102 MAX2102EVKIT-SO MAX21021
|
OCR Text |
... 950MHz to 2150MHz. A probe-tip jack is available to examine the prescaler output with a high-impedance probe.
__________________________...TYPE Surface Mount
Component List
DESIGNATION QTY B1-B5 C1, C9 C2, C3, C8, C11 C4-C7, C14, C15 C... |
Description |
Evaluation Kit for the MAX2102
|
File Size |
102.60K /
8 Page |
View
it Online |
Download Datasheet |
|
|
|
Maxim
|
Part No. |
DS2770K
|
OCR Text |
...plished either through the RJ11 jack by connecting the provided 2 conductor cable or by wiring directly to the DQ and PAC- pads. In the latt...type is being supported; either Li+ or NiMH based on the CTYPE bit in the Status register. Clicking ... |
Description |
Battery Monitor and Charge Controller Evaluation Kit From old datasheet system
|
File Size |
471.29K /
12 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|