...own later for details of how to switch between the 120output mode and 128-output mode. MC Output count change-over input Receives a signal t...low level (VSS or VEE2). VCHA Logic voltage change-over input STVR STVL Start pulse input/output Mus...
Description
120-/128-OUTPUT TFT-LCD GATE DRIVER 120-/128-OUTPUT的TFT - LCD栅极驱动 Interface IC
...m. It also performs an 8/16-bit switch via the BMODE pin.
(5) Gray scale generation circuit This circuit realizes the 25 levels by frame ...low driver interface voltage (5 V). (13) DEC Decodes the gray scale display data to make it compatib...
Description
240 OUTPUT LCD COLUMN SEGMENT DRIVER WITH BUILT-IN RAM
...d under the following timing to switch Red, Green, and Blue outputs and get each color data in a 1-pixel period. However the offset level of...low by using a pull-up or pull-down circuitry. Each unused pin should be connected to VDD or GND wit...
...on the SCL pin. The device will switch into the Bidirectional Mode when a valid transition on the SCL pin is recognized. Once the device has...low during the first eight clocks, the starting address will be 00H. During the ninth clock, SDA sho...
Description
DIODE ZENER 5.6V 120MW SSSMINI2 2-WireSerialEEPROM 2-Wire Serial EEPROM
...is will ensure that the outputs switch simultaneously. 3. Terminate all inputs and outputs to ensure proper loading of the outputs and that ...LOW and 3V HIGH for ACT devices and 0V LOW and 5V HIGH for AC devices. Verify levels with an oscillo...
Description
Quiet Series?Quad 2-Input NAND Gate From old datasheet system Quiet Series Quad 2-Input NAND Gate Quiet Series⑩Quad 2-Input NAND Gate
...is will ensure that the outputs switch simultaneously. 3. Terminate all inputs and outputs to ensure proper loading of the outputs and that ...LOW voltage level, VIL, until the output begins to oscillate or steps out a min of 2 ns. Oscillation...
...is will ensure that the outputs switch simultaneously. 3. Terminate all inputs and outputs to ensure proper loading of the outputs and that ...LOW voltage level, VIL, until the output begins to oscillate or steps out a min of 2 ns. Oscillation...
Description
Quiet Series⑩ Hex Inverter Quiet Series Hex Inverter
...is will ensure that the outputs switch simultaneously. 3. Terminate all inputs and outputs to ensure proper loading of the outputs and that ...LOW voltage level, VIL, until the output begins to oscillator steps out a min of 2 ns. Oscillation i...
Description
Quiet Series⑩ Quad 2-Input AND Gate Quiet Series Quad 2-Input AND Gate From old datasheet system