...action tool interlock lever and insert the tip of the tool into the contact cavity in the mating face of the housing. make sure that the ti...extraction tools 318813 - 1 and 318813 - 3 interlock lever plastic handle spring - loaded ...
...r on the tip of a contact, then insert it between the contact and the housing, following to the Fig. 1. 2. When the tip of the Extractor comes into contact with a stepped part in the housing, the spring will come off from the stepped part w...
...act the SNAPHAT, and then to re-insert it, reduces each time. After three or four extractions, though, the reduction starts to become unnoti...extraction Forces
20
Table 1. Description
Parameter Operating Temperature Storage Temperature N...
Description
ZEROPOWER SNAPHAT (Battery) ZEROPOWER SNAPHAT Battery 16 Characters x 4 Lines, 5x7 Dot Matrix Character and Cursor ZEROPOWER SNAPHAT电池
...r on the tip of a contact, then insert it between the contact and the housing, following to the Fig. 1. 2. When the tip of the Extractor comes into contact with a stepped part in the housing, the spring will come off from the stepped part w...
... as possible. Do not attempt to insert on an extreme angle.
U.FL-R-SMT
(1) Connection/ disconnection of connectors
After the connectors are mating, do not apply a load to the cable in excess of the values indicated in the diagram bel...
Description
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height 超小型表面贴装同轴连接器-超薄一点九毫米2.4毫米交配高度 Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height 超小型表面贴装同轴连接器-超薄一点九毫米.4毫米交配高度
...act the snaphat, and then to re-insert it, reduces each time. after four or five extractions, the reduction starts to become unnoticeable a...extraction forces 0 2.5 5 7.5 10 12.5 15 12345678910 number of extractions force (pounds) average in...
...act the SNAPHAT, and then to re-insert it, reduces each time. After four or five extractions, the reduction starts to become unnoticeable an...extraction 10 Force (pounds)
7.5
5
2.5
0 1 2 3 4 5 6 7 8 9 10
AI02526
Number of Extr...