|
|
|
Analog Devices, Inc.
|
Part No. |
AD5564
|
OCR Text |
...ects V IN to the AD5541 output, putting V IN under software control. * Select Cal Mode and enter the required VIN value at Analog Input Voltage. Press Return. * Click on Update Selected Channel to acquire VIN. * De-select Cal Mode for indiv... |
Description |
Evaluation Board for 32 Channel, Infinite Sample-and-Hold From old datasheet system
|
File Size |
240.04K /
7 Page |
View
it Online |
Download Datasheet |
|
|
|
GENNUM[Gennum Corporation]
|
Part No. |
EB-RD35
|
OCR Text |
...igured for manual mode by first putting the AUTO/MANUAL jumper (JMP2) into the 23 position. Then jumpers JMP[7:5] are set accordingly. Note that whenever the AUTO/MANUAL input of the GS9035 is HIGH (auto mode), jumpers JMP[7:5] should be le... |
Description |
GENLINX-TM II EB-RD35 Evaluation Board
|
File Size |
217.07K /
9 Page |
View
it Online |
Download Datasheet |
|
|
|
MAXIM[Maxim Integrated Products]
|
Part No. |
MAX2511EVKIT MAX2511EVKIT-SO MAX25111 MAX2511
|
OCR Text |
... to 1.75V. 2) Enable Tx mode by putting 3-pin jumper TXEN in the "1-2" position and jumper RXEN in the "2-3" position. This sets TXEN to VCC and RXEN to GND. The supply current should be about 40mA. (See Table 1.) 3) Connect the spectrum an... |
Description |
Evaluation Kit for the MAX2511
|
File Size |
129.14K /
8 Page |
View
it Online |
Download Datasheet |
|
|
|
MAXIM - Dallas Semiconductor MAXIM[Maxim Integrated Products]
|
Part No. |
MAX2510EVKIT MAX2510EVKIT-SO MAX25101 MAX2510
|
OCR Text |
.... 2) Set the part in Tx mode by putting 3-pin jumper TXEN in the "high" position, and jumper RXEN in the "low" position. 3) The supply current should be near 30mA. If this is not the case, check the voltage on the TXEN and RXEN test points.... |
Description |
Evaluation Kit for the MAX2510
|
File Size |
537.10K /
8 Page |
View
it Online |
Download Datasheet |
|
|
|
Atmel Corp.
|
Part No. |
AT27LV1026
|
OCR Text |
...ycles until cs is asserted high putting the device in standby mode, or a new nla cycle begins. for a nla cycle where a0 = 1 (ale asserted high, cs asserted low), the odd counter will be loaded with the new address (a1 - a15) while the even ... |
Description |
1-Megabit 16-bit Interleaved Low-Voltage OTP EPROM(1M位带16位交叉低电压一次可编程EPROM)
|
File Size |
133.95K /
13 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|