 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| STZ5.6N Diodes Zener diode STZ5.6N Applications Voltage regulation (Anode common twin type) External dimensions (Unit : mm) Land size figure (Unit : mm) 1.9 0.05 2.80.2 1.60.1 0.2 Features 1) Small mold type. (SMD3) 2) High reliability. (3) 1.0MIN. 0.15 0.06 0.1 0.95 0.8MIN. 00.1 0.30.6 SMD3 (2) (1) 0.95 1.90.2 0.80.1 1.10.2 0.01 Construction Silicon epitaxial planar 0.95 Structure ROHM : SMD3 JEDEC :S0T-346 JEITA : SC-59 week code Taping specifications (Unit : mm) 4.00.1 2.00.05 1.50.1 0 1.750.1 0.30.1 3.50.05 8.00.2 3.20.1 3.20.1 4.00.1 1.05MIN 00.5 5.50.2 3.20.1 1.350.1 Absolute maximum ratings (Ta=25C) Param eter Power dis s ipation *1 Junction tem perature Storage tem perature (*1) Total of 2 elem ents Sym bol P Tj Ts tg Li m its 200 150 -55 to +150 Unit mW Electrical characteristics (Ta=25C) Parameter Zener voltage Reverse current Dynamic impedance Rising operation resistance Symbol VZ IR ZZ ZZk Min. 5.31 Typ. Max. 5.92 1.00 60 200 Unit V A Conditions IZ=5mA VR=2.5V IZ=5mA IZ=0.5mA Rev.B 2.4 0.4 0.1 2.90.2 Each lead has same dimension 1/2 STZ5.6N Diodes Electrical characteristic curves (Ta=25C) 10 Ta=25 Ta=125 1000 Ta=150 Ta=125 100 f=1MHz ZENER CURRENT:Iz(mA) 1 Ta=75 0.1 Ta=150 10 1 0.1 0.01 0.001 Ta=75 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 2.5 Ta=-25 REVERSE CURRENT:IR (nA) 100 Ta=25 10 0.01 Ta=-25 0.001 4 4.5 5 5.5 6 6.5 7 ZENER VOLTAGE:Vz(V) Vz-Iz CHARACTERISTICS 0.0001 0 0.5 1 1.5 2 REVERSE VOLTAGEVR(V) VR-IR CHARACTERISTICS 1 0 0.5 1 1.5 2 2.5 3 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 5.8 5.7 5.6 5.5 5.4 5.3 Vz DISRESION MAP AVE:5.659V 1 20 CAPACITANCE BETWEENTERMINALS:Ct(pF) REVERSE CURRENT:IR(nA) ZENER VOLTAGE:Vz() Ta=25 IZ=5mA n=30pcs 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 AVE:0.080nA Ta=25 VR=2.5V n=30pcs 19 18 17 16 15 14 13 12 11 10 Ct DISRESION MAP AVE:15.64pF Ta=25 f=1MHz VR=0V n=10pcs IR DISRESION MAP TRANSIENT THAERMAL IMPEDANCE:Rth (/W) 1000 1000 Rth(j-a) DYNAMIC IMPEDANCE:Zz() 100 100 Rth(j-c) Mounted on epoxy board 10 10 IM=10mA IF=100mA 1ms time 300us 1 0.1 1 ZENER CURRENT(mA) Zz-Iz CHARACTERISTICS 10 1 0.001 0.01 0.1 TIME:t(s) 10 1 100 Rth-t CHARACTERISTICS 1000 Rev.B 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 |
Price & Availability of STZ56N
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |