![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
LSC OSCILLATOR 32.768 kHz TM Low Power Surface Mount Crystal Oscillator DESCRIPTION actual size Statek's LSC oscillator has the highest accuracy, stability and lowest current of all STATEK surface mount oscillators. The design consists of a STATEK crystal and a CMOS-compatible integrated circuit. Permanent precision tuning of the oscillator is accomplished by laser trimming the crystal. X XX SX side view FEATURES PACKAGE DIMENSIONS Low power consumption Low aging CMOS compatible 3.3V operation also available Optional Tri-State APPLICATIONS sxxxx 5V operation standard F Industrial, Computer & Communications General purpose clock oscillator Data logger Remote sensor Real time clock Medical test and diagnostics Portable field communication SUGGESTED LAND PATTERN GRID PLACEMENT COURTYARD TYPICAL DIM A B C* D E F G inches 0.400 0.180 0.065 0.200 0.080 0.050 0.055 mm 10.16 4.57 1.65 5.08 2.03 1.27 1.40 MAXIMUM inches 0.405 0.185 0.070 0.205 0.085 0.058 0.063 mm 10.29 4.70 1.77 5.21 2.16 1.47 1.60 0.075 (1.91) 0.068 (1.73) 0.064 (1.63) Termination material is Au over Ni (SM1), solder dip (SM3) also available. *SM1 Termination; SM3 = 0.075 in. (1.91mm) Max. 0.132 (3.35) inches (mm) 0.200 (5.08) 10153 - Rev C S YS TEM CERTIFIC AT STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com 01 Pb N IO IS O 90 SPECIFICATIONS: LSC 32.768 kHz ABSOLUTE MAXIMUM RATINGS Specifications are typical at 25OC unless otherwise noted. Specifications are subject to change without notice. Supply Voltage1 Calibration Tolerance Frequency Stability 2 Supply Voltage VDD Storage Temperature Process Temperature -0.3V to 7V -55OC to +125OC 260OC 20 sec. 5V + _ + _ 10% (3.3V available) ELECTRICAL CHARACTERISTICS LSC 32.768 kHz 100 ppm (0.01%) 0OC to +50OC -10OC to+70OC Voltage Coefficient Aging Shock, survival Vibration, survival Frequency Change vs 10%Output Load Change Operating Temperature + _ + _ 25 ppm 40 ppm + _ 70 ppm + _ 100 ppm + _ + _ + _ Typ. MAX. Typ. MAX. (0.0025%) (0.004%) (0.007%) (0.01%) All parameters are measured at ambient temperature with a 10M and 10pF load at 5V. SYMBOL PARAMETER VOH VOL tr tf SYM IDD Output Voltage Hi Output Voltage Lo Rise Time (10%-90%) Fall Time (10%-90%) Duty Cycle Supply Current VDD =5V VDD =3.3V PIN CONNECTIONS MIN. 4.8 TYP. MAX. UNIT 4.95 0.05 0.2 27 29 50 6.5 5 50 50 60 12 10 V V nsec. nsec. % 1 ppm/V Typ. 3 ppm/V MAX. 1 ppm/year Typ. + _ 3 ppm/year MAX. 1000 g peak, 1 ms,1/2 sine + _ 3 ppm MAX. 10 g RMS, 10 - 2000 Hz + _ 3 ppm MAX. + _ 40 A A 1 ppm MAX. Pin 1 2 3 4 Connection Output Enable or NC Ground Output VDD -10OC to +70OC (Commercial) 1. Contact the factory for lower voltage. 2. Does not include calibration tolerance. Positive variations small compared to negative variations (See data sheet 10103). PACKAGING OPTIONS LSC TYPICAL CURRENT CONSUMPTION, LSC 32.768 kHz -Tray Pack -16mm tape, 7" or 13" reels (Reference tape and reel data sheet 10109) CURRENT (uA) 8 7 6 5 3 2 3 4 5 6 7 VDD (Volts) OUTPUT WAVE FORM VDD VOH 90%* 10%* VOL 0 * Of VDD tr tf HOW TO ORDER LSC SURFACE MOUNT CRYSTAL OSCILLATORS LSC 3 3=3.3V operation. Blank=5V operation (Std.) S "S" if special or custom design. Blank if Std. T T = Tri-State Blank = Pin 1 no connection SM3 Blank = SM1 = Gold Plated (Lead Free) SM3 = Solder Dipped SM5 = Solder Dipped (Lead Free) 32.768K Frequency K = kHz , 100 Calibration Tolerance @ 25OC (in PPM) / C Temp. Range: C = -10OC to +70OC 10153 - Rev C S YS TEM CERTIFIC AT STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com 01 Pb N IO IS O 90 |
Price & Availability of LSC
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |