ligitek electronics co.,ltd. property of ligitek only lrgb9553/s17/tr1 data sheet surface mount led tape and reel doc. no : qw0905-lrgb 9553/s17/tr1 rev. : a date : 12 - oct. - 2009 pb lead-free parts l dcc
ligitek electronics co.,ltd. property of ligitek only package dimensions page 1/9 part no. lrgb9553/s17/tr1 carrier type dimensions note : 1.all dimension are in millimeter tolerance is ? 0.2mm unless otherwise noted. 2.specifications are subject to change without notice. note : the tolerances unless mentioned is ? 0.2mm, unit=mm. + --- 1.cathode or ange 2.cathode green 3.cathode blue 4.common anode b r g 12.00.3 9.3 4.00.5 3.12 5.50.2 1.75 4.00.2 2.0 1.55 2.24 0.23 4.06 1.95 0.6 0.70.05 2.8 0.70.05 1.95 0.9 1.5 1.05 0.9 123 common anode 4 2 0.70.05 1 3.5 3 4 0.70.05 g b r 3.2 2.6 2.2
part no. lrgb9553/s17/tr1 reel dimensions ligitek electronics co.,ltd. property of ligitek only page 2/9 74.0 ? 1.5 r 178 ? 2.0 14.2 ? 1.0 16.0 ? 1.0
* static electricity or power surge will damage the led. use of a c onductive wrist band or anti-electrosatic glove is recommended when handing these led. all devices, equipment and machinery must be properly grounded. part no. lrgb9553/s17/tr1 page 3/9 unit 30 sbi 30 e 30 g ratings ligitek electronics co.,ltd. property of ligitek only ma g a mw j j v 70 50 120 120 10 100 100 10 120 -30 ~ +100 -20 ~ +80 ---- ---- 500 ma i f symbol parameter forward current i fp ir pd t opr tstg esd storage temperature power dissipation reverse current @5v operating temperature electrostatic discharge peak forward current duty 1/10@10khz note : 1.the forward voltage data did not including ? 0.1v testing tolerance. 2. the luminous intensity data did not including ? 15% testing tolerance. typical electrical & optical characteristics (ta=25 j ) absolute maximum ratings at ta=25 j 430 565 635 peak wave length f pnm typ. viewing angle 2 c 1/2 (deg) max. min. typ. forward voltage @20ma(v) dominant wave length f dnm spectral halfwidth ??f nm luminous intensity @20ma(mcd) min. 120 20 12.5 120 2.6 ---- 1.7 3.8 ---- 4.7 30 ---- 465 65 8.0 12.5 ---- ---- 45 1.7 2.6 8.0 12.5 120 lens emitted color part no material green blue water clear lrgb9553/s17/tr1 gap ingan/sic gaasp/gap orange
1.0 relative intensity@20ma 0.0 0.5 wavelength (nm) 550 600 650 ambient temperature( j ) fig.5 relative intensity vs. wavelength fig.3 forward voltage vs. temperature forward voltage@20ma normalize @25 j -20 -40 0.8 1.0 0.9 1.1 1.2 0.5 relative intensity@20ma normalize @25 j -20 ambient temperature( j ) 80 60 40 20 0-40 100 0.0 80 60 02040 100 fig.4 relative intensity vs. temperature 2.5 1.5 1.0 2.0 3.0 fig.1 forward current vs. forward voltage typical electro-optical characteristics curve 100 forward current(ma) 0.1 1.0 10 1.0 1000 e chip relative intensity normalize @20ma 0.5 forward voltage(v) 2.0 3.0 4.0 5.0 1.0 0.0 1.5 1.0 2.0 2.5 forward current(ma) 10 100 1000 fig.2 relative intensity vs. forward current 3.0 ligitek electronics co.,ltd. property of ligitek only 700 750 4/9 page 30 x -30 x 50% 75% 100% 75% 50% 25% 0100% 25% -60 x 60 x fig.6 directive radiation 0 x part no. lrgb9553/s17/tr1
fig.3 forward voltage vs. temperature fig.5 relative intensity vs. wavelength ambient temperature( j ) relative intensity@20ma wavelength (nm) forward voltage@20ma normalize @25 j fig.4 relative intensity vs. temperature ambient temperature( j ) relative intensity@20ma normalize @25 j typical electro-optical characteristics curve forward voltage(v) fig.1 forward current vs. forward voltage forward current(ma) forward current(ma) fig.2 relative intensity vs. forward current relative intensity normalize @20ma ligitek electronics co.,ltd. property of ligitek only 1.0 0.1 1.0 10 100 1000 1.0 10 100 1000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -40 -20 0 20 40 60 1.0 1.1 1.2 500 550 600 650 0.0 0.5 1.0 2.0 3.0 4.0 5.0 80 100 0.8 0.9 -20 -40 40 20 080100 60 2.0 0.0 0.5 1.0 1.5 2.5 3.0 3.5 g chip 5/9 page 30 x -30 x 50% 75% 100% 75% 50% 25% 0100% 25% -60 x 60 x fig.6 directive radiation 0 x part no. lrgb9553/s17/tr1
forward current (ma dc) ambient temperature ( j ) typical electro-optical characteristics curve fig.1 forward current vs. forward voltage fig.3 relative intensity vs. forward current fig.5 forward current vs. ambient temperature relative intensity(%) forward current (ma dc) sbi chip 5 forward current(ma dc) 4 3 2 1 forward voltage(v) 0 25 15 10 20 30 10 lead temperature ( j ) relative intensity 0 1 relative intensity(%) fig.4 relative intensity vs. lead temperature wavelength (nm) 480 430 380 5 0 680 580 530 630 0.5 fig.2 relative intensity vs. wavelength 1.0 page ligitek electronics co.,ltd. property of ligitek only 75% 100% 50% 25% 0 25% 50% 100% 75% -60 x 60 x fig.6 directive radiation -30 x 0 x 30 x part no. lrgb9553/s17/tr1 75 20 0 0 10 30 40 25 50 75 100 5 0 25 0 50 45 40 30 20 25 10 15 35 50 025 100 75 100 125 6/9
part no. lrgb9553/s17/tr1 ligitek electronics co.,ltd. property of ligitek only soldering heat max. 260 j preheat 245 ? 5 j within 5 sec 2. wave solder 3. lead reflow solder 120 ~ 150 j recommended soldering conditions 1. hand solder basic spec is ?? 280 j 3 sec one time only. page 7/9 preheat rising +5 j /sec cooling -5 j /sec time 260 c max. 10sec.max 1~5 c/sec temp. ( j ) 240 150 120 4. pb-free reflow solder preheat 180~200 c above 220c 60 sec.max. 120 sec.max. note: 1.wave solder and reflow soldering should not be made more than one time. 2.you can just only select one of the soldering conditions as above. 1~5 c/sec 60 ~ 120 sec 5sec 120 ~ 180 sec
part no. lrgb9553/s17/tr1 page 8/9 ligitek electronics co.,ltd. property of ligitek only precautions for use: storage time: 1.the operation of temperatures and rh are : 5 j ~35 j ,rh<60%. 2.once the package is opened, the products s hould be used within a week. otherwise, they should be kept in a damp proof box with descanting agent. considering the tape life, we suggest our customers to use our pr oducts within a year(from production date). 3.if opened more than one week in an atmos phere 5 j ~ 35 j ,rh<60%, they should be treated at 60 j? 5 j fo r 15hrs. circuit model b led led circuit model a esd(electrostatic discharge): static electricity or power surge will damage the led. use of a c onductive wrist band or anti-electrosatic glove is recommended when handing these led. all devices, equipment and machinery must be properly grounded. cleaning: use alcohol-based cleaning solvents such as isopropyl alc ohol to clean the led. (a) recommended circuit. (b) the difference of brightness between led could be f ound due to the vf-if characteristics of led. drive method: led is a current operated device, and therefore, require r some kind of current limiting incorporated into the driver circuit. this current limiting typically takes the form of a current limiting resistor placed in series with the led. consider worst case voltage variations than could occur across the current limiting resistor. the forwrd current should not be allowed to c hange by more than 40 % of its desired value.
part no. lrgb9553/s17/tr1 page 9/9 ligitek electronics co.,ltd. property of ligitek only mil-std-750d: 1026 mil-std-883d: 1005 jis c 7021: b-1 reference standard mil-std-883d:1008 jis c 7021: b-10 jis c 7021: b-12 test condition test item classification operating life test reliability test: 1.ta=105 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) endurance test high temperature storage test 1.ta=-40 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) low temperature storage test 1.ta=under room temperature as per data sheet maximum rating. 2.if=20ma 3.t=1000 hrs (-24hrs, + 72hrs) mil-std-202f: 107d mil-std-750d: 1051 mil-std-883d: 1011 mil-std-202f: 208d mil-std-750d: 2026 mil-std-883d: 2003 iec 68 part 2-20 jis c 7021: a-2 mil-std-750d:2031.2 j-std-020 mil-std-202f: 107d mil-std-750d: 1051 mil-std-883d: 1010 jis c 7021: a-4 thermal shock test 1.t.sol=235 j? 5 j 2.immersion time 2 ? 0.5sec 3.immersion rate 25 ? 2.5mm/sec 4.immersion rate 25 ? 2.5mm/sec 5.coverage ? 95% of the dipped surface solderability test 1.ir-reflow in-board,2 times 2.ta=105 j? 5 j & -40 j? 5 j (10min) (10min) 3.total 10 cycles 1.105 j ~ 25 j ~ 55 j ~ 25 j 30mins 5mins 30mins 5mins 2.10 cyeles temperature cycling solderability test environmental test ramp-up rate(183 j to peak) +3 j second max temp. maintain at 125( ? 25) j 120 seconds max temp. maintain above 183 j 60-150 seconds peak temperature range 235 j +5-0 j time within 5 j of actual peak temperature(tp) 10-30 seconds ramp-down rate +6 j /second max mil-std-202f:103b jis c 7021: b-11 1.ir-reflow in-board, 2 times 2.ta=65 j? 5 j 3.rh=90 %~95% 4.t=1000hrs ? 2hrs high temperature high humidity storage test
|
