View A061FW01-V0_4553348.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

customer approval sheet company name model a061fw01 v0 customer approved title : name : approval for specifications only (spec. ver. ) approval for specifications and es sample (spec. ve r. ) approval for specifications and cs sample (spec. ve r. ) customer remark : auo pm : p/n : comment : doc. version : 0.1 total pages : 19 date : 2009/05/15 www.datasheet.co.kr datasheet pdf - http://www..net/
all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optronics corp. product specification 6.1" color tft-lcd module model name a061fw01 v0 planned lifetime: from 2009/may to 2011/may phase-out control: from 2010/dec to 2011/may eol schedule: 2011/may < >preliminary specification < >final specification note: the content of this specification is subject to change. ? 2009 au optronics all rights reserved, do not copy. www.datasheet.co.kr datasheet pdf - http://www..net/
record of revision version revise date page content 0.0 2009/04/14 all first draft. 0.1 2009/05/15 9 update optical specification 11 update reliability test items 13 update drawing www.datasheet.co.kr datasheet pdf - http://www..net/
a061fw01 v0 version : 0.1 page : 1 /19 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optronics corp. contents: a. physical specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p3 b. electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p4 1. pin assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p4 a.tft-lcd panel driving section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p4 b.back light driving section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p5 2.absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p5 3. electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p6 a. typical operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p6 b. current consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p6 c. backlight driving conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p6 4. ac timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p7 a. timing conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p7 b. timing diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p8 5. power sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p8 c. optical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p9 d. reliability test items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p11 e. packing form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p12 www.datasheet.co.kr datasheet pdf - http://www..net/
a061fw01 v0 version : 0.1 page : 2 /19 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optronics corp. appendix: fig.1 outline dimension of tft-lcd module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p13 fig.2 sampling clock timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p14 fig.3 horizontal display timing range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p15 fig.4 horizontal timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p16 fig.5 vertical shift clock timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p17 fig.6 vertical timing (from up to down) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p18 fig.7 the setup and hold time definition cph1 and a nalog signal vr..... p19 www.datasheet.co.kr datasheet pdf - http://www..net/
a061fw01 v0 version : 0.1 page : 3 /19 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optronics corp. a. physical specifications no. item specification remark 1 display resolution(dot) 480rgb(w)x234(h) 2 active area(mm) 136.08(w) 71.955(h) 3 screen size(inch) 6.1(diagonal) 4 dot pitch(mm) 0.0945(w)x 0.3075(h) 5 color configuration r. g. b. stripe 6 ntsc ratio 50% 7 overall dimension(mm) 149.0(w) 82.9(h) 5.1(d) note 1 8 weight (g) 113g 10% 9 surface treatment ag(25%) with ewv film 10 backlight unit led 11 gray scale inversion direction 6 oclock note 1: refer to fig. 1 www.datasheet.co.kr datasheet pdf - http://www..net/
a061fw01 v0 version : 0.1 page : 4 /19 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optronics corp. b. electrical specifications 1.pin assignment a. tft-lcd panel driving section pin no symbol i/o description remark 1 gnd - ground for logic circuit 2 nc - 3 v gl i negative power for scan driver 4 stvd i/o vertical start pulse note 1 5 udc i up/down scan control input note 1,2 6 ckv i shift clock input for scan driver 7 oev i output enable input for scan driver 8 nc - 9 nc - 10 stvu i/o vertical start pulse note 1 11 v cc i supply voltage of logic control circuit for scan driver note 4 12 dv cc i supply voltage of logic control circuit for data drive r note 4 13 v gh i positive power for scan driver 14 nc - 15 vcom i common electrode driving signal 16 sthr i/o start pulse for horizontal scan line note 1 17 av dd i supply voltage for analog circuit 18 vr i alternated video signal input(red) 19 vg i alternated video signal input(green) 20 vb i alternated video signal input(blue) 21 agnd - ground for analog circuit 22 cph1 i sampling and shifting clock pulse for data d river 23 cph2 i sampling and shifting clock pulse for data d river 24 cph3 i sampling and shifting clock pulse for data d river 25 gnd - ground for logic circuit 26 mod i sequential sampling and simultaneous sampli ng setting note 3 27 lrc i left/right scan control input note 1,2 28 oeh i output enable input for data driver 29 sthl i/o start pulse for horizontal scan line 30 gnd - ground for logic circuit note 1: selection of scanning mode (please refer to the following table) www.datasheet.co.kr datasheet pdf - http://www..net/
a061fw01 v0 version : 0.1 page : 5 /19 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optronics corp. setting of scan control input in/out state for start pulse udc lrc stvd stvu sthr sthl scanning direction gnd v cc out in out in from up to down, and from left to righ t. v cc gnd in out in out from down to up, and from right to left. gnd gnd out in in out from up to down, and from right to left. v cc v cc in out out in from down to up, and from left to righ t. in: input; out: output. note 2: definition of scanning direction. refer to figure as below: note 3: mod = h: simultaneous sampling. mod = l: sequential sampling. please set cph2 and cph3 to gnd when mod = h. note 4: electrical characteristics of v cc and dv cc are the same. b. backlight driving section (refer to figure 1) no. symbol i/o description remark 1 hi i power supply for backlight unit (high voltag e) -- 2 gnd - ground for backlight unit -- 2. absolute maximum ratings item symbol condition min. max. unit remark v cc gnd=0 -0.3 7 v av dd agnd=0 -0.3 7 v v gh -0.3 18 v v gl gnd=0 -15 0.3 v power voltage v gh v gl - 33 v v i -0.3 av dd +0.3 v note 1 v i -0.3 v cc +0.3 v note 2 input signal voltage vcom -2.9 7.5 v v f i f = 120ma 25.2 v led i f 120 ma operation temperature topr ambient -20 70 storage temperature tstg ambient -30 80 note 1: vr, vg, vb. note 2: sthl, sthr, oeh, lrc, cph1~cph3, stvd, stvu, o ev, ckv, udc, mod. www.datasheet.co.kr datasheet pdf - http://www..net/
a061fw01 v0 version : 0.1 page : 6 /19 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optronics corp. 3. electrical characteristics a. typical operating conditions (gnd=agnd=0v, note 3 ) item symbol min. typ. max. unit remark v cc 3 3.3 5.5 v note4 av dd 4.5 5 5.5 v v gh 14.3 15 15.7 v power supply v gl -10.5 -10 -9.5 v v ia 0.4 - av dd -0.4 v note 1 v iac - 4 - v ac component video signal amplitude (vr,vg,vb) v idc - av dd /2 - v dc component v cac 3.5 5.6 6.5 vp-p ac component vcom v cdc 1.38 1.58 1.78 v dc component h level v ih 0.8 v cc - v cc v input signal voltage l level v il 0 - 0.2 v cc v note 2 note 1: refer to fig.4- (a). note 2: sthl, sthr, oeh, lrc, cph1, stvd, stvu, oev, ckv , udc, mod. note 3: be sure to apply gnd, v cc and v gl to the lcd first, and then apply v gh . note 4: if input signal amplitude is 3.3v, recommend v alue for vcc is 3.3v if input signal amplitude is 5v, recommend value for vcc is 5v b. current consumption (gnd=agnd=0v) parameter symbol condition min. typ. max. unit remark i gh v gh =15v - 0.5 1.0 m a i gl v gl =-10v - 0.5 1.0 m a i cc dv cc =5v - 3.0 6.0 m a note 1 current for driver i dd av dd =5v - 12 30 m a note 1: i cc is current consumption of dv cc plus v cc. c. backlight driving conditions (self-heating type, n ote1, note3) par ameter symb ol min. typ. max. unit remark led current i l 120 ma note1 led voltage v l 9.6 10.5 v note1 led life time l l 10,000 hrs note2 note 1 : refer to below led connection scheme note 2 : under 25 , i l = 120ma, continuous operation. www.datasheet.co.kr datasheet pdf - http://www..net/
a061fw01 v0 version : 0.1 page : 7 /19 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optronics corp. 4. ac timing a. timing conditions parameter symbol min. typ. max. unit. remark clock cycle time t cph 100 103 107 ns cph1 cph pulse duty t cwh 40 50 60 % cph1 cph pulse delay t c12 t c23 t c31 30 t cph /3 t cph /2 ns cph1 sth setup time t suh 20 - - ns sthr,sthl sth hold time t hdh 20 - - ns sthr,sthl sth pulse width t sth 1 t cph sthr,sthl sth period t h 61.8 63.7 66.1 s sthr,sthl oeh pulse width t oeh 1 - - t cph oeh (note 1) sample and hold disable time t dis1 1 - - t cph note 2 oev pulse width t oev 2.0 3.4 6.5 s oev ckv pulse width t ckv 1.0 3.1 4.68 s ckv clean enable time t dis2 1.0 - 1 t oev s note 3 horizontal display start t sh 1 t cph horizontal display timing range t dh 480 t cph stv setup time t suv 400 - - ns stvu, stvd stv hold time t hdv 400 - - ns stvu, stvd stv pulse width t stv - - 1 t h stv u , stv d vertical display start t sv 3 t h vertical display timing range t dv 234 t h vcom rising time t rcom - 5 s vcom falling time t fcom - 5 s vcom delay time t dcom 2 - - s tft charging time t ch 55 - - s output time delay t del 3 - - s setup time of analog vr/vg/vb t asu 60 - - ns hold time of analog vr/vg/vb t ahd 40 - - ns frame rate 50 60 - hz note 1: for all of the logic signals. note 2: please dont use odd horizontal lines to dr ive lcd panel for both odd and even field simultaneously. note 3: for partial mode (4:3, side-black) note 4: maximum time is one line period. note5: the maximum pulse width of oeh should refer to th e minimum of t dis1 and the hsync back porch. note 6: t dis1 is time difference between oeh and sthl note 7: t dis2 is time difference between oev and ckv note 8: the unit is t cph www.datasheet.co.kr datasheet pdf - http://www..net/
a061fw01 v0 version : 0.1 page : 8 /19 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optronics corp. b. timing diagram please refer to the attached drawing, from fig.2 to fig .6. 5. power on/off sequence (only for reference) power on power off www.datasheet.co.kr datasheet pdf - http://www..net/
a061fw01 v0 version : 0.1 page : 9 /19 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optronics corp. c. optical specification (note1, note2) item symbol condition min. typ. max. unit remark response time rise fall tr tf =0 - - 15 20 50 60 ms ms note 3,5 contrast ratio cr at optimized viewing angle 350 500 - note 4, 5 viewing angle top bottom left right cr R 10 35 55 55 55 45 65 65 65 - - - - deg . note 5, 6 brightness i l =120ma, 25 350 450 cd/m 2 x =0 0.26 0.31 0.36 white chromaticity y =0 0.29 0.34 0.39 note 7 note 1 : ambient temperature =25 , and led i l = 120 ma. note 2 :to be measured on the center area of panel wit h a viewing cone of 1 by topcon luminance meter bm-5, after 15 minutes operation. note 3. definition of response time: the output signals of photo detector are measured when the input signals are changed from black to white(falling time) and from white to bl ack(rising time), respectively. the response time is defined as the time interval bet ween the 10% and 90% of amplitudes. refer to figure as below. note 4. definition of contrast ratio: contrast ratio is calculated with the following formula. contrast ratio (cr)= s i g n a l ( r e l a t i v e v a l u e ) "black" tr tf "white" "white" 0% 10% 90% 100% photo detector output when lcd is at white state photo detector output when lcd is at black state www.datasheet.co.kr datasheet pdf - http://www..net/
a061fw01 v0 version : 0.1 page : 10 /19 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optronics corp. note 5. white vi=v i50 1.5v black vi=v i50 2.0v means that the analog input signal swings in phase with v com signal. means that the analog input signal swings out of phase with v com signal. v i50 : the analog input voltage when transmission is 50% the 100% transmission is defined as the transmission of l cd panel when all the input terminals of module are electrically opened. note 6. definition of viewing angle, refer to figure a s below. note 7. measured at the center area of the panel when all the input terminals of lcd panel are electrically opened. www.datasheet.co.kr datasheet pdf - http://www..net/
a061fw01 v0 version : 0.1 page : 11 /19 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optronics corp. d. reliability test items(note 3): no. test items conditions remark 1 high temperature storage ta= 80 240hrs note1 2 low temperature storage ta= -30 240hrs 3 high temperature operation tp= 70 240hrs note2 4 low temperature operation ta= -20 240hrs 5 high temperature and high humidity tp= 50 , 80% rh 240hrs operation 6 heat shock -20 ~70 /50 cycles 2hrs/cycle non-operation 7 electrostatic discharge 200v,200pf(0 ), once for each terminal non-operation frequency range : 10hz ~ 55hz stoke : 1.5mm sweep : 10 ~ 55 ~ 10hz 2 hours for each direction of x,y,z 8 vibration (total 6 hours) jisc 7021 9 mechanical shock 100g, 6ms, x, y, z 3 times for each direction jis c7021, a-7 condition c 10 vibration (with carton) random vibration: 0.015g 2 /hz from 5~200hz C6db/octave from 200~500hz iec 68-34 11 drop (with carton) height: 60cm 1 corner, 3 edges, 6 surfaces jis z0202 note1: ta: ambient temperature. note2: tp: panel surface temperature note3: in the standard conditions, there is not displ ay function ng issue occurred. all the cosmetic specification is judged before the reliability stress. www.datasheet.co.kr datasheet pdf - http://www..net/
a061fw01 v0 version : 0.1 page : 12 /19 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optronics corp. e. packing form film protect tape creped paper www.datasheet.co.kr datasheet pdf - http://www..net/
a061fw01 v0 version : 0.1 page : 13 /19 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optronics corp. fig.1- outline dimension of tft-lcd module www.datasheet.co.kr datasheet pdf - http://www..net/
a061fw01 v0 version : 0.1 page : 14 /19 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optronics corp. 5 0 % 5 0 % 1 0 % 1 0 % 9 0 % 9 0 % s t h l ( r ) c p h 1 c p h 2 c p h 3 s t h t s u h t t h d h c 1 2 t t c 3 1 t c 2 3 c p h t t c w h t r f t fig.2 sampling clock timing www.datasheet.co.kr datasheet pdf - http://www..net/
a061fw01 v0 version : 0.1 page : 15 /19 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optronics corp. fig.3 horizontal display timing range www.datasheet.co.kr datasheet pdf - http://www..net/
a061fw01 v0 version : 0.1 page : 16 /19 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optronics corp. fig.4- horizontal timing www.datasheet.co.kr datasheet pdf - http://www..net/
a061fw01 v0 version : 0.1 page : 17 /19 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optronics corp. fig.5- vertical shift clock timing www.datasheet.co.kr datasheet pdf - http://www..net/
a061fw01 v0 version : 0.1 page : 18 /19 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optronics corp. fig.6 vertical timing (from up to down) www.datasheet.co.kr datasheet pdf - http://www..net/
a061fw01 v0 version : 0.1 page : 19 /19 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optronics corp. fig.7 the setup and hold time definition between cp h1 and analog signal vr www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of A061FW01-V0

	To Download A061FW01-V0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .