part number: ZVG67W published date : feb 27,2008 drawing no :sdsa4588 v3 checked : b.l.liu p.1/4 4.0x4.0mm right angle surface mount led lamp www.sunled.com notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3.specifications are subject to change without notice. features single color. suitable for all smt assembly and solder process. available on tape and reel. ideal for backlighting. package : 500pcs / reel. moisture sensitivity level : level 4. rohs compliant. part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. ZVG67W green ingaalp water clear 36 69 574 90 absolute maximum ratings (t a =25c ) vg (ingaalp) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 150 ma power dissipation p t 75 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 vg (ingaalp) unit forward voltage (typ.) (i f =20ma) v f 2.1 v forward voltage (max.) (i f =20ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =20ma) p 574 nm wavelength of dominant emission (typ.) (i f =20ma) d 570 nm spectral line full width at half-maximum (typ.) (i f =20ma) ? 20 nm capacitance (typ.) (v f =0v, f=1mhz) c 15 pf operating characteristics (t a =25c )
part number: ZVG67W published date : feb 27,2008 drawing no :sdsa4588 v3 checked : b.l.liu p.2/4 4.0x4.0mm right angle surface mount led lamp www.sunled.com ? vg
part number: ZVG67W published date : feb 27,2008 drawing no :sdsa4588 v3 checked : b.l.liu p.3/4 4.0x4.0mm right angle surface mount led lamp www.sunled.com ? recommended soldering pattern (units : mm;tolerance: 0.1) ? the device has a single mounting surface. the device must be mounted according to the specifications. ? tape specification (units : mm) remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
part number: ZVG67W published date : feb 27,2008 drawing no :sdsa4588 v3 checked : b.l.liu p.4/4 4.0x4.0mm right angle surface mount led lamp www.sunled.com packing & label specifications ZVG67W
|
