saw bandpass filter F4472 part no. F4472 rev. date 2013-03-22 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ncoa03-as02 1/7 3.800.15 3.800.15 1.400.15 1.270.10 1.000.15 1.500.10 0.600.10 1.000.10 1 23 7 65 1 23 65 4 7 8 4 8 features rf bandpass filter high attenuation 50 w single-ended operation ceramic surface mounted device package ( 3.8 mm 3.8 mm ) rohs compliant package dimensions dimensions shown are nominal in millimeters body : al 2 o 3 ceramic lid : kovar, ni plated terminations : au plating 0.3 ~ 1.0 um, over a 1.27 ~ 8.89 um ni plating maximum ratings parameters parameters parameters parameters unit minimum typical maximum operating temperature range -40 25 85 storage temperature range -40 25 85 power handling capability dbm - - 10 electrostatics sensitive device ( esd ) pin configurations 2 input 6 output 1, 3, 4, 5, 7, 8 case ground itf 4472
saw bandpass filter F4472 part no. F4472 rev. date 2013-03-22 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ncoa03-as02 2/7 specifications fc = 447.4 mhz notes : 1) all specifications are based on the matching s chematic shown below, measured by agilent network a nalyzer and full 2 port calibration. 2) electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances minimum typical maximum unit center frequency ( fc ) - 447.4 - mhz insertion loss *mean* (447.1 ~ 447.7 mhz) - 2.3 3.3 db amplitude ripple (447.1 ~ 447.7 mhz) 1.5 3.0 dbp-p 3db bandwidth - 1000 - khz relative attenuation 10.0 ~ 430.0 mhz 442.3 ~ 445.4 mhz 449.6 ~ 452.8 mhz 465.0 ~ 600.0 mhz 35 20 20 36 48 37 27 51 - - - - db input/output impedance 50 ohms
saw bandpass filter F4472 part no. F4472 rev. date 2013-03-22 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ncoa03-as02 3/7 matching schematic ( actual matching values may vary due to pcb layout a nd parasitics ) l1=68nh , l2=68nh marking configuration itf 1) 4472 2) 1) manufacturer name 2) marking number * ink or laser marking available
saw bandpass filter F4472 part no. F4472 rev. date 2013-03-22 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ncoa03-as02 4/7 typical performance
saw bandpass filter F4472 part no. F4472 rev. date 2013-03-22 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ncoa03-as02 5/7 input / output smith chart input / output vswr
saw bandpass filter F4472 part no. F4472 rev. date 2013-03-22 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ncoa03-as02 6/7 packing specification 1. reeling quantity : 3000 pcs / 13 reel ( or 1000 pcs / 7 reel ) 2. taping structure : the tape shall be wound around t he reel in the direction shown below. tape specification 1. leader part and vacant position specification 2. tensile strength of carrier tape 4.4n/mm width 3. top cover tape adhesion 1) pull off angle : 0~15 2) speed : 300mm/min 3) force : 20~70g reel reel reel reel top cover tape top cover tape top cover tape top cover tape carrier tape carrier tape carrier tape carrier tape end end end end start start start start tape running direction vacant 150mm min. component contained vacant 150mm min. leader part 250mm min. 0~15 degree top cover tape direction of pull carrier tape
saw bandpass filter F4472 part no. F4472 rev. date 2013-03-22 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ncoa03-as02 7/7 carrier tape dimensions [unit : mm] part direction reel dimensions [unit : mm] a 4.30 0.1 b 4.30 0.1 c 7.25 0.1 d 1.70 0.1 e 12.00 0.1 f 8.00 0.1 tape running direction
|
