View G065VN01-V1_7871958.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

g065vn01 v1 rev. 0.2 1/24 g065vn01 v1 ( ) preliminary specifications (v ) final specifications module 6.5 inch color tft-lcd model name g065vn01 v1 customer date ______ checked & approved by ______ note: this specification is subject to change without notice. approved by date debbie chiu 2008/03/07 __ prepared by david hsing 2008/03/07 ___ general display business division / au optronics corporation www..net gleichmann & co. electronics gmbh product marketing displays & systems schraderstr. 44, d- 67227 frankenthal tel : +49 7249-910-0, fax: +49 7249-910-559 display@msc-ge.com http://www.msc-ge.com
g065vn01 v1 rev. 0.2 2/24 g065vn01 v1 contents 1. operating precautions ........................... ................................. 4 2. general description ............................. ................................... 5 2.1 display characteristics ........................ ................................................... ............................................ 5 2.2 optical characteristics ........................ ................................................... ............................................. 6 3. functional block diagram ................................................... .... 9 4. absolute maximum ratings ........................ ............................ 9 4.1 absolute ratings of tft-lcd module ............. ................................................... .............................. 9 4.2 absolute ratings of environment................ ................................................... .................................... 9 5. electrical characteristics ...................... ................................ 10 5.1 tft-lcd driving ................................ ................................................... .......................................... 10 5.2 backlight unit................................. ................................................... ............................................... 11 6. signal characteristic........................... .................................. 13 6.1 pixel format image............................. ................................................... ........................................... 13 6.2 scanning direction ............................. ................................................... ........................................... 13 6.3 the input data format.......................... ................................................... ......................................... 14 6.4 tft-lcd interface signal description........... ................................................... ............................... 15 6.5 tft-lcd interface timing ....................... ................................................... ..................................... 16 6.6 ccfl backlight unit interface .................. ................................................... .................................... 18 6.7 power on/off sequence.......................... ................................................... .................................... 18 7. connector & pin assignment ...................... .......................... 19 7.1 tft-lcd signal (cn1): lcd connector ............ ................................................... ......................... 19 7.2 backlight unit (cn2): backlight connector ...... ................................................... ........................... 19 7.3 pin 1 definition of cn1 and cn2 ................ ................................................... ................................ 20 8. reliability test criteria ....................... .................................. 21 9. mechanical characteristics ...................... ............................. 22 10. label and packaging ............................ ............................... 23 10.1 shipping label (on the rear side of tft-lcd di splay) ............................................. ..................... 23 10.2 carton package ................................ ................................................... ............................................ 23 11 safety .......................................... ........................................ 24 11.1 sharp edge requirements....................... ................................................... ..................................... 24 11.2 materials ..................................... ................................................... ................................................. 24 11.3 capacitors .................................... ................................................... ................................................ 24 11.4 national test lab requirement................. ................................................... ................................... 24 www..net
g065vn01 v1 rev. 0.2 3/24 g065vn01 v1 record of revision version and date page old description new description remark 0.1 mar 19, 2007 all first edition final specifications to all customers 5 support color: 16.2m or 262k support color:262k s ection 2 5 typical power consumption 4.4w (ircfl=5.0ma) 3.7w (ircfl=3.8ma) typical power consumption 4.54w (ircfl=5.0ma) 3.78w (ircfl=3.8ma) section 2 5 no description the most suitable view angle: 6 o?clock section 2.1 9 no description absolute ratings of tft-lcd module ccfl current: 6.5 ma (rms) section 4.1 11 section 5.2.1 11,12 revise note 1, note 4 section 5.2.1 16 no description add h/v mode timing characteristi cs section 6.5.1 16 no description add note 2, note 3 section 6.5.1 17 no description add h/v mode input timing diagram section 6.5.2 18 no description add ccfl backlight unit interface section 6.6 20 revise pin 1 definition of cn1 and cn2 section 7.3 21 cold start test: -10 www..net
g065vn01 v1 rev. 0.2 4/24 g065vn01 v1 1. operating precautions 1) display area (polarizer) of tft-lcd module is ea sily to be damaged, please be cautious and not to scratch it. 2) be sure to power off your machine before connect ing or disconnecting your signal cable to tft-lcd module. 3) wipe off water drop on display area immediately. long contact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with a bsorbent cotton or soft cloth. 5) display area (glass) of tft-lcd module may be br oken or cracked if bump module against hard object. 6) to avoid esd (electro static discharde) damage, be sure to ground yourself before handling tft-lcd module. 7) do not open nor modify the tft-lcd module assemb ly. 8) do not press the reflector sheet at the back of the module to any direction. 9) in case if a tft-lcd module has to be put back i nto the packing container slot after it was taken out from the container, do not press the center of the ccfl reflector edge. instead, press at the far ends of the ccfl reflector edge softly. otherwi se the tft-lcd module may be damaged. 10) when inserting or removing of your signal cable to tft-lcd module, be sure not to apply abnormal force (rotate, tilt?etc.) to the connector of the tft-lcd module. 11) tft-lcd module is not allowed to be twisted & b ent even force is added on module in a very short time. please design your display product well to avoid external force applying to module by end-user directly. 12) cold cathode fluorescent lamp (ccfl) in tft-lcd module contains a small amount of mercury. please follow local ordinances or regulations for d isposal. 13) small amount of materials having no flammabilit y grade is used in the tft-lcd module. the tft-lcd module should be supplied by power complied with requirements of limited power source (iec60950 or ul1950), or be applied exemptio n. 14) the ccfl in tft-lcd module should be supplied b y inverter complied with limited current circuit (iec60950 or ul1950). do not connect the cc fl with hazardous voltage circuit. 15) severe temperature condition may result in diff erent luminance, response time and lamp ignition voltage. 16) continuous operating tft-lcd module under low t emperature environment may accelerate lamp exhaustion and reduce luminance dramatically. 17) the data on this specification sheet is applica ble when tft-lcd module is placed in landscape position. 18) continuous displaying fixed pattern may induce image sticking. it?s recommended to use screen saver or moving content periodically if fixed patte rn is displayed on the screen. www..net
g065vn01 v1 rev. 0.2 5/24 g065vn01 v1 2. general description g065vn01 v1 is designed for industrial display appl ications with vga (640 x rgb x 480) resolution and 262k colors (rgb 6-bits). it is composed of a t ft-lcd panel, driver ics, control and power supply circuits and a backlight unit. g065vn01 v1 o ffers cmos interface for display signal input. inverter board of backlight is not included. 2.1 display characteristics the following items are g065vn01 v1 characteristics summary at 25 condition www..net
g065vn01 v1 rev. 0.2 6/24 g065vn01 v1 2.2 optical characteristics the optical characteristics are measured under stab le conditions at 25 (room temperature) 20 msec falling - 10 15 response time msec raising + falling - 25 35 6 degree degree horizontal (right) cr = 10 (left) 60 60 70 70 - - viewing angle degree degree vertical (upper) cr = 10 (lower) 50 50 60 60 - - 7 red x 0.590 0.620 0.650 red y 0.320 0.350 0.380 green x 0.275 0.305 0.335 green y 0.550 0.580 0.610 blue x 0.115 0.145 0.175 blue y 0.085 0.115 0.145 white x 0.283 0.313 0.343 color / chromaticity coordinates (cie 1931) white y 0.299 0.329 0.359 color gamut % 50 55 - note 1: measurement method equipment pattern generator, power supply, digi tal voltmeter, luminance meter (sr_3 or equivalent) aperture 1 with 50cm viewing distance environment < 1 lux lcd module sr_3 or equivalent measuring distance module driving equipment www..net
g065vn01 v1 rev. 0.2 7/24 g065vn01 v1 note 2: definition of 5 points position (display ac tive area: 132.48mm(w) x 99.36mm(h)) 1 2 3 4 5 h /4 h /4 h /4 h /4 h w w /4 w /4 w /4 w /4 note 3: definition of 13 points position note 4: the luminance uniformity of 5 and 13 points is defi ned by dividing the maximum luminance value by the minimum luminance value at full white condition. www..net
g065vn01 v1 rev. 0.2 8/24 g065vn01 v1 note 5: definition of contrast ratio (cr): note 6: definition of response time: the output signals of photo detector are measured w hen the input signals are changed from ?white? to ? black? (falling time) and from ?black? to ?white? (rising time), re spectively. the response time interval definition i s between 10% and 90% of amplitude. please refer to the figure as below. note 7: definition of viewing angle viewing angle is the measurement of contrast ratio R l , r ) and 180 vertical ( h , l ) range are illustrated as following figure. contrast ratio (cr)= brightness on the ?white? state brightness on the ?black? state 100 90 10 0 % optical response white black white tf tr 90 10 0 optical response white black white tr www..net
g065vn01 v1 rev. 0.2 9/24 g065vn01 v1 3. functional block diagram the following diagram shows the functional block of the g065vn01 v1 color tft-lcd module. 4. absolute maximum ratings 4.1 absolute ratings of tft-lcd module item symbol min max unit logic/lcd drive voltage vdd -0.3 +4.0 v ccfl current ircfl - 6.5 ma (rms) 4.2 absolute ratings of environment item symbol min max unit operating temperature top -20 +70 o c operation humidity hop 5 95 %rh storage temperature tst -20 +80 o c storage humidity hst 5 95 %rh note 1: maximum wet-bulb should be 39 and no conden sation. www..net
g065vn01 v1 rev. 0.2 10/24 g065vn01 v1 5. electrical characteristics 5.1 tft-lcd driving 5.1.1 power specification symbol parameter min typ max units remark vdd logic/lcd drive voltage 3.0 3.3 3.6 v idd vdd current - 225 - ma all black pattern (vdd=3.3v, at 60hz) irush lcd inrush current - - 1.5 a note 1 pdd vdd power - 0.74 - w all black pattern (vdd=3.3v, at 60hz) vddrp allowable logic/lcd drive ripple voltage - - 100 mv p-p all black pattern (vdd=3.3v, at 60hz) note 1: measurement condition: q3 ao6402 g d2 s d1 d5 d6 q3 ao6402 g d2 s d1 d5 d6 c1 1uf/16v c2 1uf/25v c3 0.01uf/25v f1 vr1 47k +12.0v vcc sw1 sw mag-spst 1 2 (high to low) control signal (lcd module input) r2 1k +3.3v r1 47k r2 1k 90% 10% vdd rising time 0v 3.3v 0.5ms vdd www..net
g065vn01 v1 rev. 0.2 11/24 g065vn01 v1 5.1.2 signal electrical characteristics input signals shall be low or hi-z state when vdd i s off. parameter symbol min. typ. max. unit remarks high vih 0.7vdd - vdd v logic input voltage for display signals low vil 0 - 0.3vdd v high vih 0.7vdd - vdd v input voltage for dps low vil 0 - 0.3vdd v 5.2 backlight unit 5.2.1 parameter guideline for ccfl following characteristics are measured under a stab le condition using an inverter at 25 (room temperat ure) www..net
g065vn01 v1 rev. 0.2 12/24 g065vn01 v1 it is recommended to use the inverter with detectio n circuit (ie: balance and protection circuit) to a void over voltage, over current, or mismatching waveform. note 2: ccfl operation frequency should be carefull y determined to avoid interference between inverter and tft-lcd. higher frequency will induce higher leakage current and further impact lamp life. note 3: calculation value for reference (ircflxvcfl x2=pcfl). note 4: the definition of lamp life means when any of following conditions happen: a) luminance falls to 50% or less of the initial va lue. b) normal lighting is no more available (flickering , pink lighting, no lighting, etc.) c) lamp operation voltage or ignition voltage excee ds the specified value. lamp life time shortens according to, placing methodology: mercury is unevenly distribut ed in portrait mounting. environmental condition: mercury vapor quantity co ntained in lamp is reduced at low temperature condition, which results in approximately 1,000 hou rs lamp life. ccfl surface temperature: temperature gradient on lamp surface causes uneven mercury migration. inverter design: its resonance capacitor should be fine-tuned according to the impedance of ccfl. over driving current ( > 5.5 ma) shortens lamp lif e time dramatically. note 5: the display is with dual lamp design, and t he ccfl operation current in above table is for eac h lamp. www..net
g065vn01 v1 rev. 0.2 13/24 g065vn01 v1 6. signal characteristic 6.1 pixel format image following figure shows the relationship between inp ut signal and lcd pixel format. 6.2 scanning direction the following figures show the image seen from the front view. the arrow indicates the direction of sc an. fig. 1 normal scan (pin31, dps = low or nc) fig. 2 reverse scan (pin31, dps = high) note 1: tft-lcd interface signal description is sho wn in section 6.4. www..net
g065vn01 v1 rev. 0.2 14/24 g065vn01 v1 6.3 the input data format this product displays 262,144 colors in terms of th e 64 grey levels on rgb respectively. the following table demonstrates the display of input data. www..net
g065vn01 v1 rev. 0.2 15/24 g065vn01 v1 6.4 tft-lcd interface signal description pin no. symbol pin description 1 gnd ground 2 dotclk dot clock 3 hsync horizontal synchronous signal 4 vsync vertical synchronous signal 5 gnd ground 6 r0 red data (lsb) 7 r1 red data 8 r2 red data 9 r3 red data 10 r4 red data 11 r5 red data (msb) 12 gnd ground 13 g0 green data (lsb) 14 g1 green data 15 g2 green data 16 g3 green data 17 g4 green data 18 g5 green data (msb) 19 gnd ground 20 b0 blue data (lsb) 21 b1 blue data 22 b2 blue data 23 b3 blue data 24 b4 blue data 25 b5 blue data (msb) 26 gnd ground 27 de data enable signal 28 vdd power supply (3.3v typ. only) 29 vdd power supply (3.3v typ. only) 30 reserved no connection or ?low? (for auo internal test) 31 dps no connection or ?low?: normal display (default) high: reversed display (180 rotation) note 1: input signals shall be in low status when v dd is off. www..net
g065vn01 v1 rev. 0.2 16/24 g065vn01 v1 6.5 tft-lcd interface timing 6.5.1 timing characteristics de mode signal parameter symbol min. typ. max. unit remark clock timing clock frequency (dotclk) 1/ t clock 20 25.2 50 mhz note1, 2 period t h 770 800 1070 active t hd 640 640 640 hsync timing horizontal section blanking t hb 130 160 430 t clock note1, 2 period t v 520 525 622 active t vd 480 480 480 vsync timing vertical section blanking t vb 40 45 142 t line note1, 2 h/v mode signal parameter symbol min. typ. max. unit remark clock timing clock frequency (dotclk) 1/ t clock 20 25.2 50 mhz note 3 display period t hsd 640 front porch t hsf 30 60 330 hsync pulse width + back porch t hsw +t hsb 100 hsync timing horizontal section hsync period t hs 770 800 1070 t clock note 3 display period t vsd 480 front porch t vsf 5 10 107 vsync pulse width + back porch t vsw +t vsb 35 vsync timing vertical section vsync period t vs 520 525 622 t line note 3 note 1: recommended frame rate is 60 hz. note 2: g065vn01 v1 tft-lcd module can support de & h/v mode. when de and h/v signal are existed simultaneously, g065vn01 v1 tft-lcd module is opera ted in de mode only. note 3: h/v mode is negative polarity. www..net
g065vn01 v1 rev. 0.2 17/24 g065vn01 v1 6.5.2 de & h/v mode input timing diagram dotclk de t h t hb t hd de t v t vb t vd input timing definition ( de mode) t clock input data pixel 1 pixel 2 pixel 3 pixel n-1 pixel n invaild data invaild data pixel 1 www..net
g065vn01 v1 rev. 0.2 18/24 g065vn01 v1 6.6 ccfl backlight unit interface pin no. cable color symbol pin description 1 pink hot1 lamp high voltage 2 pink hot2 lamp high voltage 3 nc no connection 4 white cold1 lamp low voltage 6.7 power on/off sequence vdd power, lcd interface signals and backlight on/o ff sequence are shown in the following chart. signa ls from any system shall be hi-z state or low level when vdd is off. power on/off sequence timing value parameter min. typ. max. units t1 0.5 - 10 ms t2 0 - 50 ms t3 180 - - ms t4 180 - - ms t5 0 - 50 ms t6 0 - 10 ms t7 500 - - ms on/off sequence should be applied to avoid abnormal function in the display. please make sure to turn off the power when you plug the cable into the input connector or pull the cable out of the connector. t 7 t 5 t2 t 3 valid data t1 10 90% 10% 90% t 4 t 6 power supply vdd display signal backlight on www..net
g065vn01 v1 rev. 0.2 19/24 g065vn01 v1 7. connector & pin assignment 7.1 tft-lcd signal (cn1): lcd connector connector name / designation signal connector manufacturer hirose or compatible connector model number df9b-31p-1v or compatible mating connecter model number www..net
g065vn01 v1 rev. 0.2 20/24 g065vn01 v1 7.3 pin 1 definition of cn1 and cn2 www..net
g065vn01 v1 rev. 0.2 21/24 g065vn01 v1 8. reliability test criteria items required condition note temperature humidity bias 40 /90%,300hr water condensation is not allowed for each test it ems. each test is done by new tft-lcd module. please do n?t use the same tft-lcd module repeatedly for reliability test. the reliability test is performed only to examine the tft-lcd module. to inspect tft-lcd module after reliability test, please store it at room temperature and room humidi ty for 24 hour at least in advance. www..net
g065vn01 v1 rev. 0.2 22/24 g065vn01 v1 9. mechanical characteristics note 1: self-taping screw suggested torque value: m aximum 2.0 kgf-cm www..net
g065vn01 v1 rev. 0.2 23/24 g065vn01 v1 10. label and packaging 10.1 shipping label (on the rear side of tft-lcd display) 10.2 carton package max capacity: 80 tft-lcd module per carton (40pcs * 2 layers) max weight: 19 kg per carton outside dimension of carton: 425(l)mm* 386(w)mm* 43 0(h)mm www..net
g065vn01 v1 rev. 0.2 24/24 g065vn01 v1 11 safety 11.1 sharp edge requirements there will be no sharp edges or comers on the displ ay assembly that could cause injury. 11.2 materials 11.2.1 toxicity there will be no carcinogenic materials used anywhe re in the tft-lcd module. if toxic materials are us ed, they will be reviewed and approved by the responsible auo tox icologist. 11.2.2 flammability all components including electrical components that do not meet the flammability grade ul94-v1 in the tft-lcd module will complete the flammability rating except ion approval process. the printed circuit board will be made from materia l rated 94-v1 or better. the actual ul flammability rating will be printed on the printed circuit board. 11.3 capacitors if any polarized capacitors are used in the tft-lcd module, provisions will be made to keep them from being inserted backwards. 11.4 national test lab requirement the tft-lcd module will satisfy all requirements fo r compliance to ul 60950 (u.s.a. information techno logy equipment). www..net

▲Up To Search▲

Price & Availability of G065VN01-V1

	To Download G065VN01-V1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .