View M201UN02V5_7868419.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www..net
2/2 product specification m201un02 v.5 ver0.3 product specification 20.1 uxga color tft-lcd module model name: m201un02 v.5 ( u ) preliminary specifications ( ) final specifications note: this specification is subject to change without notice. www..net
3/3 product specification m201un02 v.5 ver0.3 i contents ii record of revision 1.0 handling precautions 2.0 general description 2.1 display characteristics 2.2 functional block diagram 2.3 optical characteristics 2.4 pixel format image 3.0 electrical characteristics 3.1 absolute maximum ratings 3.2 connectors 3.3 signal pin 3.4 signal description 3.5 signal electrical characteristics 3.6 interface timing 3.6.1 timing characteristics 3.6.2 timing definition 3.7 power consumption 3.8 power on/off sequence 4.0 backlight characteristics 4.1 signal for lamp connector 4.2 parameter guide line for ccfl inverter 5.0 vibration, shock and drop 5.1 vibration and shock 5.2 drop test 6.0 environment 6.1 temperature and humidity 6.1.1 operating conditions 6.1.2 shipping conditions 6.2 atmospheric pressure 6.3 thermal shock 7.0 reliability 7.1 failure criteria 7.2 failure rate 7.2.1 usage 7.2.2 components de-rating 7.3 ccfl life 7.4 on/off cycle 8.0 safety 8.1 sharp edge requirement 8.2 material 8.2.1 toxicity 8.2.2 flammability 8.3 capacitors 8.4 hazardous voltage 9.0 other requirements 9.1 smoke free design 9.2 national test lab requirement www..net
4/4 product specification m201un02 v.5 ver0.3 10.0 mechanical characteristics ii record of revision version and date page old description new description remark 0.1 2005/04/21 all first edition for customer all 0.2 2005/06/22 8 contrast ratio min. target 400 contrast ratio min. target 700 revised 0.2 2005/06/22 13 lamp connector / backlight lamp manufacturer: jst type part number: bhsr-02vs-1 (2 pin), bhr-05vs-1 (5 pin) mating type part number: sm02b-bhss-1(2 pin), sm04b-bhs-1 (5 pin) lamp connector / backlight lamp manufacturer: yeonho type part number: 35001hs-02l (2 pins), 20015hs-05l (5 pins) mating type part number: 35001wr-02l (2 pins), 20015wr-05l (5 pins) revised 0.2 2005/06/22 22 ccfl standard current min. target: 3 ma ccfl standard current min. target: 4 ma revised 0.2 2005/06/22 22 ccfl frequency typ. target: 50 max. target: 60 ccfl frequency typ. target: 55 max. target: 70 revised 0.2 2005/06/22 22 ccfl ignition voltage min. target: tbd ccfl ignition voltage min. target: 1600 defined 0.2 2005/06/22 22 ccfl ignition voltage min. target: tbd ccfl ignition voltage min. target: 1230 defined 0.2 2005/06/22 22 ccfl discharge voltage typ. target: tbd max. target: tbd ccfl discharge voltage typ. target: 744 max. target: 820 defined 0.2 2005/06/22 22 ccfl power consumption typ. target: tbd max. target: tbd ccfl power consumption typ. target: 31.3 max. target: 37 defined 0.3 2005/06/29 21 signal for lamp connector connector no. cn2 pin no. 1 color gray pin no. 4 color black connector no. cn5 pin no. 1 color gray pin no. 4 color black signal for lamp connector connector no. cn2 pin no. 1 color pink pin no. 4 color red connector no. cn5 pin no. 1 color pink pin no. 4 color red revised 0.3 2005/06/29 23 vibration mode: new added vibration mode: random added 0.3 2005/06/29 26 mechanism diagram change new mechanism diagram revised 0.3 2005/06/29 27 mechanism diagram change new mechanism diagram revised 1.0 handling precautions www..net
5/5 product specification m201un02 v.5 ver0.3 1) since front polarizer is easily damaged, pay attention not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open nor modify the module assembly. 8) do not press the reflector sheet at the back of the module to any directions. 9) in case if a module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the ccfl reflector edge. instead, press at the far ends of the ccfl reflector edge softly. otherwise the tft module may be damaged. 10) at the insertion or removal of the signal interface connector, be sure not to rotate nor tilt the interface connector of the tft module. 11) after installation of the tft module into an enclosure (desktop monitor bezel, for example), do not twist nor bend the tft module even momentary. at designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the tft module from outside. otherwise the tft module may be damaged. www..net
6/6 product specification m201un02 v.5 ver0.3 2.0 general description this specification applies to the 20.1 inch color tft-lcd module m201un02 v.5. the display supports the uxga (1600(h) x 1200(v)) screen format and 16.7m colors (rgb 8-bits data). all input signals are 2 channel lvds interface compatible. this module does not contain an inverter card for backlight. 2.1 display characteristics the following items are characteristics summary on the table under 25 condition: items unit specifications screen diagonal [mm] 510(20.1") active area [mm] 408.0 (h) x 306.0 (v) pixels h x v 1600(x3) x 1200 pixel pitch [mm] 0.255 (per one triad) x 0.255 pixel arrangement r.g.b. vertical stripe display mode normally black white luminance [cd/m 2 ] 300 cd/m 2 (typ) contrast ratio 1000 : 1 (typ) optical response time ( gray to gray) [msec] 16 (typ) nominal input voltage vdd [volt] +5.0 v power consumption (vdd line + ccfl line) [watt] 45w(typ.) (w/o inverter, all white pattern) weight [grams] 3300 (max) physical size [mm] 432(w) x 331.5(h) x 25 max(d) electrical interface even/odd r/g/b data, 3 sync signal, clock support color 16.7m colors (rgb 8-bit data ) surface treatment anti-glare (3h) temperature range operating storage (shipping) [ o c] [ o c] 0 to +50 -20 to +60 www..net
7/7 product specification m201un02 v.5 ver0.3 2.2 functional block diagram the following diagram shows the functional block of the 20.1 inches color tft-lcd module: lvds + 5v c o n n e c t o r dc/dc converter lvds receiver timing controlle r gamma correction tft-lcd 1600*(3)*1200 pixels x - driver ic y - d r i v e r i c g1 g1200 d1 d4800 inverter dc power 6 ccfl i/f + x-pcb au asic over drivin g www..net
8/8 product specification m201un02 v.5 ver0.3 2.3 optical characteristics the optical characteristics are measured under stable conditions at 25 (room temperature): item unit conditions min. typ. max. [degree] [degree] horizontal (right) cr = 10 (left) 75 85 85 - - viewing angle [degree] [degree] vertical (up) cr = 10 (down) 75 85 85 - - contrast ratio normal direction 700 1000 [msec] raising time - 11 15 [msec] falling time - 5 7 response time (note 1 & 4) [msec] raising + falling - 16 22 [msec] gray to gray - 8 red x 0.624 0.654 0.684 red y 0.301 0.331 0.361 green x 0.255 0.285 0.315 green y 0.559 0.589 0.619 blue x 0.109 0.139 0.169 color / chromaticity coordinates (cie) blue y 0.044 0.074 0.104 white x 0.283 0.313 0.343 color coordinates (cie) white white y 0.299 0.329 0.359 white luminance at ccfl 7.0ma (central point) [cd/m 2 ] 240 300 - luminance uniformity (note 2) [%] 75 80 - crosstalk (in 60hz) (note 3) [%] 1.5 equipment pattern generator, power supply, digital voltmeter, luminance meter (pr 880, bm-5a , bm- 7 , & ezcontrast* ) aperture 1 with 100cm vd or 2 with 50cm viewing distance test point center (iso point 22) environment < 1 lux * ez contrast is different measurement tool with very close viewing distance. note 1: definition of response time: l c d m o d u l e pr-880 / bm5a / bm7 module driving equipment measuring distance www..net
9/9 product specification m201un02 v.5 ver0.3 the output signals of photodetector are measured when the input signals are changed from black to white (rising time), and from white to black (falling time), respectively. the response time is interval between the 10% and 90% of amplitudes. refer to figure as below. note 2: brightness uniformity of these 9 points is defined as below: minimum luminance in 9 points (1-9) uniformity = maximum luminance in 9 points (1-9) 50 % 90 % 90 % 50 % 10 % 10 % optical response 100% 90% 10% 0% tf tr white black white www..net
10/10 product specification m201un02 v.5 ver0.3 note 3: crosstalk is defined as below : unit: percentage of dimension of display area l l a -l a l / l a x 100%= 1.5% max., l a and l b are brightness at location a and b l l b -l b l / l b x 100%= 1.5% max., l a and l b are brightness at location a and b note 4: over-drive and response time: algorithm: 16 b level - a level 3 then ms t ms t f r 16 & 16 1/2 1/2 1/6 1/6 a b 1/2 1/2 1/6 1/6 2/3 1/3 1/3 2/3 a 0% 10% 90% 100% time time o p t i c a l r e s p o n s e d r i v i n g s i g n a l a b trtf www..net
11/11 product specification m201un02 v.5 ver0.3 2.4 pixel format image following figure shows the relationship of the input signals and lcd pixel format. r g b r g b r g b r g b r g b r g b r g b r g b 1 2 1 599 1600 1st line 1 200 th line www..net
12/12 product specification m201un02 v.5 ver0.3 3.0 electrical characteristics 3.1 absolute maximum ratings absolute maximum ratings of the module is as following: item symbol min max unit conditions logic/lcd drive voltage vin -0.3 +6.0 [volt] select lvds data order sellvds nc nc [volt] ccfl inrush current icfll - 40 [ma] note 1 ccfl current icfl - 8 [ma] rms operating temperature top 0 +50 [ o c] note 2 operating humidity hop 8 95 [%rh] note 2 storage temperature tst -20 +60 [ o c] note 2 storage humidity hst 8 95 [%rh] note 2 note 1 : duration=50 msec. note 2 : maximum wet-bulb should be 39 and no condensation. t=65 ,h=29% relative humidity % temperature o c - 20 0 60 50 95 5 100 0 operation range storage range storage 80 60 40 20 twb=39 t=40 ,h=95% t=60 ,h=39% t=50 ,h=55% www..net
13/13 product specification m201un02 v.5 ver0.3 3.2 connectors physical interface is described as for the connector on module. these connectors are capable of accommodating the following signals and will be following components. connector name / designation interface connector / interface card manufacturer jae or compatible type part number fi-xb30ssl-hf15 or msbkt2407p30 mating housing part number fi-x30s-h connector name / designation lamp connector / backlight lamp manufacturer yeonho type part number 35001hs-02l (2 pins), 20015hs-05l (5 pins) mating type part number 35001wr-02l (2 pins), 20015wr-05l (5 pins) 3.3 signal pin pin# signal name pin# signal name 1 rxo0- 2 rxo0+ 3 rxo1- 4 rxo1+ 5 rxo2- 6 rxo2+ 7 gnd 8 rxoc- 9 rxoc+ 10 rxo3- 11 rxo3+ 12 rxe0- 13 rxe0+ 14 gnd 15 rxe1- 16 rxe1+ 17 gnd 18 rxe2- 19 rxe2+ 20 rxec- 21 rxec+ 22 rxe3- 23 rxe3+ 24 gnd 25 nc 26 nc 27 nc 28 power 29 power 30 power www..net
14/14 product specification m201un02 v.5 ver0.3 3.4 signal description the module using a pair of lvds receiver sn75lvds82(texas instruments) or compatible. lvds is a differential signal technology for lcd interface and high speed data transfer device. transmitter shall be sn75lvds83(negative edge sampling) or compatible . the first lvds port(rxoxxx) transmits odd pixels while the second lvds port(rxexxx) transmits even pixels. pin # signal name description 1 rxo0- negative lvds differential data input (odd data) 2 rxo0+ positive lvds differential data input (odd data) 3 rxo1- negative lvds differential data input (odd data) 4 rxo1+ positive lvds differential data input (odd data) 5 rxo2- negative lvds differential data input (odd data, h-sync,v-sync,dsptmg) 6 rxo2+ positive lvds differential data input (odd data, h-sync,v-sync,dsptmg) 7 gnd power ground 8 rxoc- negative lvds differential clock input (odd clock) 9 rxoc+ positive lvds differential clock input (odd clock) 10 rxo3- negative lvds differential data input (odd data) 11 rxo3+ positive lvds differential data input (odd data) 12 rxe0- negative lvds differential data input (even clock) 13 rxe0+ positive lvds differential data input (even data) 14 gnd power ground 15 rxe1- positive lvds differential data input (even data) 16 rxe1+ negative lvds differential data input (even data) 17 gnd power ground 18 rxe2- negative lvds differential data input (even data) 19 rxe2+ positive lvds differential data input (even data) 20 rxec- negative lvds differential clock input (even clock) 21 rxec+ positive lvds differential clock input (even clock) 22 rxe3- negative lvds differential data input (even data) 23 rxe3+ positive lvds differential data input (even data) 24 gnd power ground 25 nc - 26 nc - 27 nc - 28 power power 29 power power 30 power power note: input signals of odd and even clock shall be the same timing. lvds data name description dsp display timing: when the signal is high, the pixel data shall be valid to be displayed v-s vertical sync: both positive and negative polarity are acceptable h-s horizontal sync: both positive and negative polarity are acceptable www..net
15/15 product specification m201un02 v.5 ver0.3 ti lvds x mitter sn75lvds83 module lvds signal (interface connector pin7) signal name low(open) d0 red0 d1 red1 d2 red2 d3 red3 d4 red4 d5 red7 d6 red5 d7 green0 d8 green1 d9 green2 d10 green6 d11 green7 d12 green3 d13 green4 d14 green5 d15 blue0 d16 blue6 d17 blue7 d18 blue1 d19 blue2 d20 blue3 d21 blue4 d22 blue5 d23 na d24 h sync d25 v sync d26 display timing d27 red6 www..net
16/16 product specification m201un02 v.5 ver0.3 note: r/g/b data 7:msb, r/g/b data 0:lsb o = first pixel data e = second pixel data rxoin0 rxo n1 rxoin2 rxoin3 rxoclki rxeclki rxein2 rxein0 rxein3 rxein1 g0 r 5 r4 r3 r2 r1 r0 b1 b0 g5 g4 g3 g2 g1 b2 b3 b4 b5 hs vs de rsv b7 b6 g7 g6 r7 r6 g0 r5 r4 r3 r2 r1 r0 b1 b0 g5 g4 g3 g2 g1 b2 b3 b4 b5 rsv b7 b6 g7 g6 r7 r6 www..net
17/17 product specification m201un02 v.5 ver0.3 3.5 signal electrical characteristics input signals shall be low or hi-z state when vin is off it is recommended to refer the specifications of sn75lvds82dgg (texas instruments) in detail. each signal characteristics are as follows; parameter condition min max unit vth differential inputhigh voltage(vcm=+1.2v) 100 [mv] vtl differential input low voltage(vcm=+1.2v) -100 [mv] note: the value of vcm from lvds transmitter should follow the following guide. parameter min typ. max unit vcm +1.0 +1.2 +1.35 [v] 3.6 interface timings basically, interface timings described here is not actual input timing of lcd module but output timing of sn75lvds82dgg (texas instruments) or equivalent. 3.6.1 timing characteristics (de mode only) signal item symbol min typ max unit period tv 1211 - 2048 th active tdisp(v) 1200 1200 1200 th vertical section blanking tbp(v)+tfp(v)+pwvs 11 - 848 th period th 860 - 1500 tclk active tdisp(h) 800 800 800 tclk horizontal section blanking tbp(h)+tfp(h)+pwhs 60 - 700 tclk period tclk 12 - - ns clock frequency freq 64 81 83 mhz www..net
18/18 product specification m201un02 v.5 ver0.3 3.6.2 timing definition note :1600x1200 at 60 hz (vesa standard) h s y n c p i x e l n 1 m i n v a l i d d a t a t d i s p ( v ) 1 0 d e d e i n v a l i d d a t a r g b d a t a t h 2 r g b d a t a ( e v e n ) 3 9 m - 1 i n v a l i d d a t a 1 n h s y n c m - 2 i n v a l i d d a t a 1 1 65 m - 3 v s y n c i n v a l i d d a t a c l k m - 5 i n v a l i d d a t a m - 4 7 2 t b p ( h ) p i x e l p i x e l p i x e l p i x e l p i x e l r g b d a t a ( o d d ) 1 2 t b p ( v ) t c l k p i x e l p i x e l p i x e l p i x e l p i x e l p i x e l p i x e l p i x e l p i x e l p i x e l p i x e l p i x e l 8 4 3 4 t v t d i s p ( h ) l i n e l i n e l i n e l i n e l i n e l i n e t f p ( v ) t f p ( h ) p w v s p w h s www..net
19/19 product specification m201un02 v.5 ver0.3 3.7 power consumption input power specifications are as follows; symbol parameter min typ max units condition vdd logic/lcd drive voltage 4.5 5 5.5 [volt] idd vdd current 1300 1500 [ma] iidd inrush vdd current 7 [a] t < 80us pdd vdd power 6.5 8.3 [watt] vin=5v, all white pattern vddrp allowable logic/lcd drive ripple voltage 100 [mv] p-p vddns allowable logic/lcd drive ripple noise 100 [mv] p-p www..net
20/20 product specification m201un02 v.5 ver0.3 3.8 power on/off sequence vin power and lamp on/off sequence is as follows. interface signals are also shown in the chart. signals from any system shall be hi-z state or low level when vin is off. values symbol min typ max unit t1 0.5 - 10 [ms] t2 0.5 40 50 [ms] t3 200 - - [ms] t4 200 - - [ms] t5 0.5 16 50 [ms] t6 0.5 - 10 [ms] t7 1000 - - [ms] 10% 90%90% 10% t1 t2t5t6t7 t3 t4 0v lamp signal vin10% 0v 0v 10% 90%90% 10% t1 t2t5t6t7 t3 t4 0v lamp signal vin10% 0v 0v 10% 90%90% 10% t1 t2t5t6t7 t3 t4 0v lamp signal vin10% 0v 0v www..net
21/21 product specification m201un02 v.5 ver0.3 4.0 backlight characteristics 4.1 signal for lamp connector connector no. pin no. color function 1 pink high voltage (lamp 1) 2 sky blue high voltage (lamp 3) 3 nc nc 4 red low voltage (lamp 1) cn2 5 dark blue low voltage (lamp 3) 1 white high voltage (lamp 2) upper cn3 2 white low voltage (lamp 2) 1 white high voltage (lamp 5) cn4 2 white low voltage (lamp 5) 1 pink high voltage (lamp 6) 2 sky blue high voltage (lamp 4) 3 nc nc 4 red low voltage (lamp 6) lower cn5 5 dark blue low voltage (lamp 4) www..net
22/22 product specification m201un02 v.5 ver0.3 4.2 parameter guide line for cfl inverter symbol parameter min typ max units condition iscfl ccfl standard current 4.0 7.0 8.0 [ma] rms (ta=25 o c) ircfl ccfl operation range 6.5 7.0 7.5 [ma] rms (ta=25 o c) fcfl ccfl frequency 40 55 70 [khz] (ta=25 o c) note 1 vicfl (0 o c) ccfl ignition voltage note 4 1600 [volt] rms (ta=0 o c) note 2 vicfl (25 o c) ccfl ignition voltage note 4 1230 [volt] rms (ta=25 o c) note 2 vcfl ccfl discharge voltage (reference) @ 7 ma 744 820 [volt] rms (ta=25 o c) note 3 pcfl ccfl power consumption @ 7 ma 31.3 37 [watt] (ta=25 o c) note 3 note 1: ccfl frequency should be carefully determined to avoid interference between inverter and tft lcd note 2: ccfl inverter should be able to give out a power that has a generating capacity of over 1700 voltage. lamp units need 1700 voltage minimum for ignition note 3: calculator value for reference (icfl vcflx6=pcfl) note 4: (measure for both end of lamp wire) www..net
23/23 product specification m201un02 v.5 ver0.3 5.0 vibration, shock, and drop 5.1 vibration & shock vibration mode random acceleration (grms) 1.5 frequency (hz) 10~200 active time (min) 30 for each axis (x, y, z) 5.2 shock test spec: acceleration (g) C a 50 active time -b 20 wave form half-sin times 1 direction: x , y, z 5.3 drop test package test: the drop height is 60 cm. 6.0 environment the display module will meet the provision of this specification during operating condition or after storage or shipment condition specified below. operation at 10% beyond the specified range will not cause physical damage to the unit. 6.1 temperature and humidity 6.1.1 operating conditions the display module operates error free, when operated under the following conditions; temperature 0 0 c to 50 0 c relative humidity 8% to 95% wet bulb temperature 39.0 0 c www..net
24/24 product specification m201un02 v.5 ver0.3 6.1.2 shipping conditions the display module operates error free, after the following conditions; temperature -20 0 c to 60 0 c relative humidity 8% to 95% wet bulb temperature 39.0 0 c 6.2 atmospheric pressure the display assembly is capable of being operated without affecting its operations over the pressure range as following specified; pressure note maximum pressure 1040hpa 0m = sea level minimum pressure 674hpa 3048m = 10.000 feet note : non-operation attitude limit of this display module = 30,000 feet. = 9145 m. 6.3 thermal shock the display module will not sustain damage after being subjected to 100 cycles of rapid temperature change. a cycle of rapid temperature change consists of varying the temperature from -20 0 c to 60 0 c, and back again. thermal shock cycle -20 0 c for 30min 60 0 c for 30min power is not applied during the test. after temperature cycling, the unit is placed in normal room ambient for at least 4 hours before powering on. 7.0 reliability this display module and the packaging of that will comply following standards. 7.1 failure criteria the display assembly will be considered as failing unit when it no longer meets any of the requirements stated in this specification. only as for maximum white luminance, following criteria is applicable. note : maximum white luminance shall be 150 cd/m 2 or more. 7.2 failure rate the average failure rate of the display module (from first power-on cycle till 1,000 hours later) will not exceed 1.0%. the average failure rate of the display module from 1,000 hours until 16,000 hours will not exceed 0.7% per 1000 hours. www..net
25/25 product specification m201un02 v.5 ver0.3 7.2.1 usage the assumed usage for the above criteria is: 220 power-on hours per month 500 power on/off cycles per month maximum brightness setting operation to be within office environment (25 0 c typical) 7.2.2 component de-rating all the components used in this device will be checked the load condition to meet the failure rate criteria. 7.3 ccfl life the assumed ccfl life will be longer than 50,000 hours, typical value is 50,000 hours under stable condition at 25 5 o c; standard current at 7.0 0.5ma. definition of life: brightness becomes 50% or less than the minimum luminance value of ccfl. 7.4 on/off cycle the display module will be capable of being operated over the following on/off cycles. on/off value cycles +vin and ccfl power 30,000 10 seconds on / 10 seconds off 8.0 safety 8.1 sharp edge requirements there will be no sharp edges or comers on the display assembly that could cause injury. 8.2 materials 8.2.1 toxicity there will be no carcinogenic materials used anywhere in the display module. if toxic materials are used, they will be reviewed and approved by the responsible auo toxicologist. 8.2.2 flammability all components including electrical components that do not meet the flammability grade ul94-v1 in the module will complete the flammability rating exception approval process. the printed circuit board will be made from material rated 94-v1 or better. the actual ul flammability rating will be printed on the printed circuit board. www..net
26/26 product specification m201un02 v.5 ver0.3 8.3 capacitors if any polarized capacitors are used in the display assembly, provisions will be made to keep them from being inserted backwards. 9.0 other requirements 9.1 national test lab requirement the display module will satisfy all requirements for compliance to ul 1950, first edition u.s.a. information technology equipment csa c22.2 no.950-m89 canada, information technology equipment eec 950 international, information technology equipment en 60 950 international, information processing equipment (european norm for iec950) 9.2 label 9.2.1 product label 10.0 mechanical characteristics www..net
27/27 ver0.3 www..net
28/28 ver0.3 www..net

▲Up To Search▲

Price & Availability of M201UN02V5

	To Download M201UN02V5 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .