data brief for further information contact your local stmicroelectronics sales office. october 2010 doc id 18074 rev 1 1/3 3 AD-ICD in-circuit debugging adapter for st7fliteux applications features AD-ICD adapter with a 10-pin icc connector and an st7fliteux microcontroller in a dip16 package device adapter for target device in a dip8 package on-application connector (8-pin header) for target device in an so8 package description the AD-ICD in-circuit de bugging adapter simply connects to your application board in place of the target microcontroller. the AD-ICD can debug an application running on an st7fliteux microcontroller via a 10-pin icc connector to an icd tool that uses the in-circuit communication (icc) protocol for st7. once the AD-ICD?s microcontroller has been programmed, it can run the application in place of the target microcontroller in standalone mode, without being connected to an in-circuit debugging tool or the host pc. debugging uses a minimum of 4 pins on the target st7 microcontroller. to allow you to take full advantage of the available pins on the target device, the AD-ICD adapter uses a variant of the target microcontroller with additional pins for icd. for in-circuit debugging of devices in dfn8 packages, users must order a dfn8 device adapter (st7mdt10-8/dvp). table 1. device summary part number reference AD-ICD in-circuit debugging adapter for st7fliteux applications. (order code AD-ICD/ ds8z-01) www.st.com
AD-ICD 2/3 doc id 18074 rev 1 revision history table 2. document revision history date revision changes 28-oct-2010 1 initial release.
AD-ICD doc id 18074 rev 1 3/3 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by an authorized st representative, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2010 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
