f 0586 eph3r3030 28.0 0.3 0.5 0.1 0.5 2.6 0.1 0.2 0.15 m aerugifotrefer 2.0 07.8 27.27 2.80 5.00 3.23.2 2 2 recommended soldering print pattern figure a 5 : 1 ( ma sk th ic kn e ss= 2 0 0 m ) 8.50 0.1 0.20 0.15 0. 25 +0 . - 0.05 2.0 37.0 0 ~ 1 0 2 3 ogolynapmoc rebmuntol mo d e l na me kramlu - c,lu tuv mark 71 8 14 37.7 + 0.5 - 0.2 23.5 + 0.4 - 0.2 o u t line diagram pin arrangement function pin vin (-) 1 vin (+) 2 test 3 remote 4 ?? 5 vout (-) 6 vout (+) 7 nc 8 alm 9 pecout 10 pecin 11 st artin 12 st artout 13 opps 14 functions module status/connection method pin name power to the dc/dc converter can be started and stopped by the remote control signal. resume the supply of power to the dc/dc converter with the remote control signal when power has been interrupted by a transient cause (overvoltage, overcurrent or voltage drop). an alarm signal is not sent out by this signal when the dc/dc converter is inactive. power interrupted: open power started: connected to the vin(+) potential ( vin (+) + 0 v,- 5 v) remote enters the alarm mode and switches to the vin(-) potential as a result of detecting overvoltage, overcurrent or voltage drop. alm terminal intake current: 5 ma (max) alm transmits alarm information to another dc/dc converter during parallel connection. pecout: transmits alarm information to own dc/dc converter pecin : receives alarm information and switches own dc/dc converter to alarm mode. pecin and pecout are connected in a loop during parallel connection. in the case of stand-alone use, pecin is connected to vin(-), while pecout is open. pec in /out transmits start/stop status to another dc/dc converter during parallel connection. startout: a signal is transmitted when starting and stopping is possible. startin : receives a start/stop signal to start/stop own dc/dc converter. startin and startout are connected in a loop during parallel connection. in the case of stand-alone use, startin is connected to vin(-), while startout is open. start in /out connected to vin(-) at all times. opps open (use prohibited) test (2) parallel operation multiple dc/dc converters can be operated by connecting in parallel. a maximum of 10 converters can be operated in parallel. (3) inrush current the dc/dc converter is not provided with a built-in inrush current prevention circuit. (4) adjust the dc/dc converter is not equipped with an adjustment function (1) control signal pins
|
