design and specifications are each subject to change without notice. ask factory for the current technical specifications befo re purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. plastic film capacitors 1 2 3 4 5 6 7 8 9 10 11 12 e z t v k c y t p h 1 a dc-link film capacitor type : type1 features recommended applications construction high safety, self-healing and self-protecting function built in. no catastrophic failure upon natural end of life due to inbuilt fuse function. open circuit failure mode by fuse function patterned electrode can replace electrolytic capacitor low esr, high ripple current capability low esl rohs directive compliant any automotive and/or other application requiring dc linkage ? verify the usage and ? tting environments, and make sure to observe the rated performance speci? ed in the corresponding speci? cations. dielectric : polypropylene electrode : metallized dielectric with segment pattern plastic case : pps. equivalent to ul94 v-0 sealing : epoxy resin equivalent to ul94 hb terminal : copper with tin plating note: 1) voltage includes ripple voltage 2) derate the current when the maximum surface temperature exceeds 95 degc, as shown in fig. 1. operating temperature on the surface of the case C 40 c to +105 c including self heat generation capacitance 581 f +10 % at 1 khz, 25 oc rated voltage 450 v.dc maximum voltage 600 v.dc for 60 sec in life time rated ripple current continuous 80 arms at 10 khz current derating refer fig.1 esr 0.8 m or less at 10khz esl 20 nh or less at 1mhz insulation resistance between terminals and case 1 g or more measure after applying 500 +50 v.dc for 2 +2 seconds. dimensions l w h (typical data) 164 115 43.1 mm : excluding terminals weight (typical data) 980 g ?5 % 00 explanation of part number specifi cations feb. 2016 01
design and specifications are each subject to change without notice. ask factory for the current technical specifications befo re purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. plastic film capacitors ?40 60 100 90 80 70 60 50 40 30 20 10 0 65 70 75 80 85 90 100 105 110 95 95 c ripple current (arms @ 10k hz) temperature on the surface of the capacitor housing (c) fig.1 current derating curve 43.11 1641 1361 n p 80.3 170.4 1 22.5 34.50.7 700.4 92.5 (7.5) (6.5) 1490.4 2-12 6 181 (22) 63.50.4 85.50.4 2- f 6.5 +0.3 0 (34.5) 80 stamping area (51.5) 33 stamping area (20) (40) hatched area : label 4- f 6.9 +0.3 0 unit : mm dimensions current derating feb. 2016 01
design and specifications are each subject to change without notice. ask factory for the current technical specifications befo re purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. plastic film capacitors esr (m ) 10 1.0 0.0 0.2 0.4 0.6 0.8 15 frequency (khz) esr 20 25 ?40 ?20 10 ?10 ?5 0 5 20 40 temperature (c) c/c (%) at 1 khz c/c 60 80 100 0 10 0.0 0.2 0.4 0.6 0.8 esr esr (m ) at 10 khz ?40 ?20 20 40 temperature (c) 60 80 100 0 change of capacitance ? expected life : 15,000 hours ? failure in time : 300 fits the above values are reference calculated under an pre-assumed average operating condition. equivalent series resistance equivalent series resistance characteristics feb. 2016 01
|
