1/6 XBP14E5UFN-G low capacitance tvs diode array product name package order unit XBP14E5UFN-G * dfn2510-10a 5,000pcs/reel * the ?-g? suffix denotes halogen and antimony free as well as being fully eu rohs compliant. absolute maximum ratings ta=25 parameter symbol ratings unit junction temperature tj 125 storage temperature tstg -55 to +150 iec61000-4-2 (esd) air v esd_a 15 kv iec61000-4-2 (esd) contact v esd_c 8 kv etr29021-001 features terminal capacitance : 0.8pf (line-to-gnd) esd protection environmentally friendly : 8kv contact (iec61000-4-2) : eu rohs compliant, pb free a pplications usb 3.0 dvi set top box product name packaging information dfn2510-10a unit : inch (mm) pin configuration 3 4 5 2 8 7 6 9 10 1 1. i/o 1 2. i/o 2 3. gnd 4. i/o 3 5. i/o 4 6. nc 7. nc 8. gnd 9. nc 10. nc
2/6 XBP14E5UFN-G electrical characteristics ta=25 parameter symbol test conditions limits unit min. typ. max. stand-off voltage v rwm - - 5 v breakdown voltage v br i r =1ma, i/o pin to pin3 6 - 9 v leakage current i r v r =5v, i/o pin to pin3 - - 1 a clamping voltage (8/20 s) v c i pp =2.5a, i/o pin to pin3 - 11 13 v terminal capacitance c t v r =0v, f=1mhz between i/o pin to pin3 - 0.6 0.8 pf c t v r =0v, f=1mhz between i/o pins - 0.35 0.4 pf notes on use 1. please use this ic within the absolute maximum ratings. even within the ratings, in case of high load use continuously such as high temperat ure, high voltage, high current and thermal stress may cause reliability degradation of the ic. 2. torex places an importance on improv ing our products and their reliability. we request that users incorporate fail-sa fe designs and post-aging protec tion treatment when using torex products in their syst ems.
3/6 XBP14E5UFN-G typical performance characteristics (1) clamping voltage vs. peak pulse current (2) reverse current vs. reverse voltage (3) transmission line pulse (tlp) measurement
4/6 XBP14E5UFN-G reference pattern layout dfn2510-10a unit : inch (mm) (0.20) 0.008 0.096 (0.50) 0.020 0.020 (0.50) 0.020 (0.50) 0.020 (0.50) 0.020 (0.40) 0.016 (0.50) 0.051 (1.30) 0.012 (0.30) marking ?? control number
5/6 XBP14E5UFN-G taping specifications dfn2510-10a unit : mm symbol mm d 0 1.55 0.05 d1 0.50 0.05 e 1.75 0.10 f 3.50 0.05 p 0 4.00 0.10 p1 4.00 0.10 p2 2.00 0.05 w 8.00 + 0.30 - 0.15
6/6 XBP14E5UFN-G 1. the product and product specific ations contained herein are subject to change without notice to improve performance characteristics. consult us, or our representatives befor e use, to confirm that the information in this datasheet is up to date. 2. the information in this datasheet is intended to illustrate the operation a nd characteristics of our products. we neither make warranties or repres entations with respect to the accuracy or completeness of the information contained in this dat asheet nor grant any license to any intellectual property rights of ours or any third party concerning with the information in this datasheet. 3. applicable export control laws and regulations should be complied and the procedures required by such laws and regulations should also be followed, when the product or any information contained in this datasheet is exported. 4. the product is neither intended nor warranted for use in equipment of systems which require extremely high levels of quality and/or reliability a nd/or a malfunction or failure which may cause loss of human life, bodily injury, serious property damage including but not limited to devices or equipment used in 1) nuclear facilities, 2) aerospace industry, 3) medical fa cilities, 4) automobile industry and other transportation industry and 5) safety device s and safety equipment to control combustions and explosions. do not use the product for the above us e unless agreed by us in writing in advance. 5. although we make continuous efforts to im prove the quality and reliability of our products; nevertheless semiconductors are likely to fail with a certain probability. so in order to prevent personal injury and/or property damage resulting from such failure, customers are required to incorporate adequate safety measures in their des igns, such as system fail safes, redundancy and fire prevention features. 6. our products are not designed to be radiation-resistant. 7. please use the product listed in this datasheet within the specified ranges. 8. we assume no responsibility for damage or loss due to abnormal use. 9. all rights reserved. no part of this datasheet may be copied or reproduced unless agreed by torex semiconductor ltd in writing in advance. torex semiconductor ltd.
|
