... output Select levels (V1, VEE) Non-select levels (V2, V5)
7/8
Semiconductor Truth Table
DF L L H H X Shift register data L H L H X DISPOFF H H H H L
MSM6568A
Driver output level (O1-O160) V2 VEE V5 V1 V1
X : Don't Care
...
... captured and not inverted. The non-inverted value is finally overwritten to the corresponding bit of the lower 8 bits of the custom code'. The inverse occurs when no pull-up resistor is connected. It follows from the above that the custom ...
...ation bi-directional invert / non-invert ttl-cmos convert 3v-5v convert to roidal construction low profile dual or quad packs 700vdc...inverted +ve going pulse non-inverted ?e going pulse selection guide order code t ype function us m...
Description
Dual and Quad Data-bus Isolators DATACOM TRANSFORMER FOR BUFFER DRIVE APPLICATION(S) DISPLAY CAT5 25-PAIR 24-AWG MALE TELCO 25-PAIR PVC 200 FT 2 FEMALE CONNECTORS
...ch; 3-state
FEATURES * 3-state non-inverting outputs for bus oriented applications * Common 3-state output enable input * Functionally iden...inverted outputs and the "563" and "573" have a different pin arrangement.
TYPICAL SYMBOL tPHL/ t...
Description
Octal D-type transparent latch;3-state(D透明锁存器;三态;) 八路D型透明锁存器,3态(透明锁存器,三 Octal D-type transparent latch 3-state Octal D-type transparent latch;
3-state From old datasheet system 74HC/HCT373; Octal D-type transparent latch; 3-state
...essors/microcomputers * 3-state non-inverting outputs for bus oriented applications * Common 3-state output enable input * Functionally iden...inverted outputs and the "373" has a different pin arrangement.
TYPICAL SYMBOL tPHL/ tPLH PARAMET...
... the selected data in the true (non-inverted) form. The enable input (E) is active LOW. When E is HIGH, all of the outputs (1Y to 4Y) are forced LOW regardless of all other input conditions. Moving the data from two groups of registers to f...
Description
Quad 2-input multiplexer LV/LV-A/LVX/H SERIES, QUAD 2 LINE TO 1 LINE MULTIPLEXER, TRUE OUTPUT, PDSO16 Quad 2-input multiplexer 输入复用
...ut for controlling a relay. The non-inverting input of the receive op-amp. The inverting input of the receive op-amp. The output of the rece...inverted output of the line driving amplifier (TXON). When set to `1' TXON is enabled; together with...